manualshive.com logo in svg

KUHN ALTERNA 500R, Руководство по сборке и эксплуатации

Поделиться
Скачать
KUHN ALTERNA 500R Скачать руководство пользователя страница 23

- 21 -

ADJUSTMENTS

5) Cylinder stroke sensor for rear

transport wheel position

This sensor has been factory adjusted to open the
electric circuit when the rear transport wheel is
completely lowered. Readjustment may be neces-
sary but only very occasionally.

- Fully extend work wheel cylinders, pivot the cut-

ting/conditioning unit at right angle to the drawbar
and completely raise the transport wheels.

- Undo lock nut (3) and screw in bolt (2) as far as it

will go.

- Press thumb switch and at the same time operate

DE2 to lower the transport wheels.

- Undo bolt (2) until its head operates the sensor (1)

which in turn extinguishes the blue indicator lamp
built into the junction box.

- Undo bolt (2) one more turn and retighten lock nut

(3), while at the same time keeping bolt (2) from
rotating.

- Ensure that a minimum safety clearence of 1 mm

is maintained between the bolt head and the sensor
plunger when it is fully drawn in.

For safety reasons the machine
cannot be pivoted into transport
position until the sensor (1) is ac-
tivated by completely lowering
transport wheels.

Содержание ALTERNA 500R





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды