manualshive.com logo in svg

KUHN ALTERNA 500R, Руководство по сборке и эксплуатации

Поделиться
Скачать
KUHN ALTERNA 500R Скачать руководство пользователя страница 35

- 33 -

LUBRICATION

III) Gyrodine Gearbox

The gearbox is filled with 6 liters of SHELL SPIRAX
SAE 80 W  EP (GL4) oil.  Check oil level and refill if
necessary using plug (1) which has a dipstick (3) with
an inlaid mark (4) indicating oil level.
Oil can be drained by means of plug hole (2).

- Imperatively change oil in after the

first 10 hours of use.

- Thereafter, oil must be changed after

every 200 hours of work, or at least
once per year.

- Periodically check oil level.

IV) Upper central pivot gearbox

The upper central pivot gearbox (5) is fitted with 1.75
liters of SHELL SPIRAX EP 80 oil. Check oil level and
refill if necessary using plug (7) which has a dipstick
(6) with an inlaid mark indicating oil level. Drain oil by
drawing it up through hole (7) using a syringe.

Note : The upper central pivot gearbox has been

equipped with this dipstick as from the 1999
production year.

V) Lower central pivot gearbox

Lower central pivot gearbox (8) is filled with 1.75
liters of SHELL SPIRAX SAE 80 W  EP (GL4) oil.
Check oil level and refill if necessary using plug hole
(9). Oil level is correct when the oil reaches the edge
of hole (9).
Oil can be drained by means of plug hole (10).

Содержание ALTERNA 500R





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды