RADEX
®
-N
Operating/Assembly instructions
KTR-N
Sheet:
Edition:
47110 EN
26 of 31
24
Please observe protection
note ISO 16016.
Drawn:
2019-07-23 Pz/Wb
Replacing:
KTR-N dated 2018-07-17
Verified:
2019-07-26 Pz
Replaced by:
Breakdowns
Causes
Hazard notes for
potentially explosive
atmospheres
Elimination
Breaking of steel
lamina set
Operating error of the
unit
Ignition risk due to
sparking
1) Set the unit out of operation
2) Disassemble the coupling and remove
remainders of the steel lamina sets
3) Inspect coupling components and replace
coupling components that have been
damaged
4) Insert steel lamina sets, assemble coupling
components
5) Instruct and train the service staff
Cracks in/fracture of
the steel lamina
sets/fastening screws
Vibrations of drive
1) Set the unit out of operation
2) Disassemble the coupling and remove
remainders of the steel lamina sets
3) Inspect coupling components and replace
coupling components that have been
damaged
4) Insert steel lamina sets, assemble coupling
components
5) Inspect alignment, adjust if necessary
6) Find out the reason for vibrations
!
When operating with a faulty lamina set (see chapter 10.2) proper operation is not assured.
In the interest of the environment our products comply with directive EC 1907/2006 (REACH). Any substances
specified in the REACH SVHC list in an impermissible concentration are not used.
In respect of environmental protection we would ask you to dispose of the packaging or products on termination of
their service life in accordance with the legal regulations and standards that apply, respectively.
All coupling components consist of metal. Any metal components have to be cleaned and disposed of by scrap
metal.
6
Breakdowns, causes and elimination
7
Environment and disposal
7.1 Environment
7.2 Disposal
