02/HANDLEBAR, CONTROLS AND INSTRUMENTS
15
5.1
Adjusting basic position of clutch lever
700393-11
–
Adjust the basic setting of the clutch lever to the size of your child's hand by turn-
ing the adjusting screw
.
Info
Turn the adjusting screw clockwise to increase the distance between the
clutch lever and the handlebar.
Turn the adjusting screw counterclockwise to decrease the distance between
the clutch lever and the handlebar.
The range of adjustment is limited.
Turn the adjusting screw by hand only, and do not apply any force.
Do not make any adjustments while riding!
5.2
Checking play in gas Bowden cable
700453-10
–
Move the handlebar to the straight-ahead position.
–
Push back bellows
.
–
It must be possible to raise the outer casing of the gas Bowden cable away from the
adjusting screw by distance
without encountering a resistance.
Play in gas Bowden cable
3… 5 mm (0.12… 0.2 in)
» If the gas Bowden cable play does not meet specifications:
–
Adjust the play in the gas Bowden cable. (
–
Push bellows
on. Check the throttle grip for smooth operation.
5.3
Adjusting play in gas Bowden cable
700453-01
–
Move the handlebar to the straight-ahead position.
–
Push back bellows
.
–
Loosen nut
. Turn adjusting screw
in as far as possible.
–
Turn the adjusting screw so that there is play in the gas Bowden cable at the gas
Bowden cable casing.
Guideline
Play in gas Bowden cable
3… 5 mm (0.12… 0.2 in)
–
Tighten nut.
–
Push bellows
on. Check the throttle grip for smooth operation.
–
Check play in the gas Bowden cable. (
5.4
Handlebar position
0
0
B
B
0
0
A
A
400271-11
On the upper triple clamp, there are 2 holes at a distance of
to each other.
Distance
between holes
15 mm (0.59 in)
The holes on the handlebar support are placed at a distance of
from the center.
Distance
between holes
3.5 mm (0.138 in)
The handlebar supports can be mounted in 4 different positions.
PartShark.com
877-999-5686
