09/FRONT WHEEL
31
11.3
Checking the tire condition
Info
Only mount tires that have been approved and/or recommended by KTM.
Other tires could have a negative effect on riding behavior.
The type, condition and air pressure of the tires all have an important impact on the riding behavior of the motorcycle.
The front and rear wheels must be mounted with tires with similar profiles.
Worn tires have a negative effect on riding behavior, especially on wet surfaces.
–
Check the front and rear tires for cuts, run-in objects and other damage.
» If the tires exhibit cuts, run-in objects or other damage:
–
Change the tires.
–
Check the depth of the tread.
Info
Note local national regulations concerning the minimum tread depth.
Minimum tread depth
≥
2 mm (
≥
0.08 in)
» If the tread depth is less than the minimum permissible depth:
–
Change the tires.
11.4
Checking tire air pressure
Info
Low tire air pressure leads to abnormal wear and overheating of the tire.
Correct tire air pressure ensures optimal riding comfort and maximum tire service life.
700434-01
–
Remove the dust cap.
–
Check the tire air pressure when the tires are cold.
Tire air pressure off road
Front
1.0 bar (15 psi)
Rear
1.0 bar (15 psi)
» If the tire pressure does not meet specifications:
–
Correct the tire pressure.
–
Mount the dust cap
11.5
Checking brake discs
Warning
Danger of accidents
Reduced braking due to worn brake discs.
–
Worn brake discs should be replaced immediately in an authorized KTM workshop.
A
A
400257-10
–
Check the thickness of the front and rear brake discs at several places on the disc
to see if it conforms to measurement
.
Info
Wear reduces the thickness of the brake disc around the area used by the
brake linings.
Brake discs - wear limits
Front
2.5 mm (0.098 in)
Rear
2.5 mm (0.098 in)
» If the brake disc thickness is less than the specified value:
–
Change the brake disc.
–
Check the front and rear brake discs for damage, cracking and deformation.
» If the brake disk exhibits damage, cracking or deformation:
–
Change the brake disc.
PartShark.com
877-999-5686
