KTM 50 SX MINI 2010 Скачать руководство пользователя

Страница: 26 / 85

MAINTENANCE WORK ON CHASSIS AND ENGINE

–

Tighten screw



Guideline

Screw, top triple clamp

25 Nm
(18.4 lbf ft)

–

Fully tighten screws



Guideline

Screw, bottom triple clamp

10 Nm (7.4 lbf ft)

–

Repeat the adjustment on the other fork leg.

Info

The setting of the vehicle level via the fork legs must be identical on both
fork legs.

9.13

Adjusting seat height

Warning

Danger of accidents

Modifications to the suspension settings can seriously alter the vehicle's ride behavior.

–

Following modifications, ride slowly at first to get the feel of the new ride behavior.

–

Remove shock absorber.

(

p. 22)

700521-01

–

Position the shock absorber according to the required seat height.
Guideline

Low seat position (standard)



High seat position



–

Install shock absorber.

(

p. 23)

9.14

Cleaning dust boots of fork legs

–

Jack up the motorcycle. (

p. 20)

700478-11

–

Push dust boots



of both fork legs upwards.

Info

The dust boots should remove dust and coarse dirt particles from the fork
tubes. Over time, dirt can penetrate behind the dust boots. If this dirt is not
removed, the oil seals behind can start to leak.

Warning

Danger of accidents

Reduced braking efficiency due to oil or grease on the

brake discs.

–

Always keep the brake discs free of oil and grease, and clean them with
brake cleaner when necessary.

–

Clean and oil the dust boots and inner fork tube of both fork legs.

Universal oil spray (

p. 79)

–

Press the dust boots back into their normal position.

–

Remove excess oil.

–

Remove the motorcycle from the work stand. (

p. 20)

Содержание 50 SX MINI 2010






















































































Результаты поиска

Содержание 50 SX MINI 2010

Отзывы:

Похожие инструкции для 50 SX MINI 2010

Бренды по названию

Популярные бренды

KTM 50 SX MINI 2010, Руководство пользователя

Результаты поиска

Содержание 50 SX MINI 2010

Отзывы:

Похожие инструкции для 50 SX MINI 2010

Бренды по названию

Популярные бренды