KTM 50 SX MINI 2010 Скачать руководство пользователя | Manualshive

Страница: 36 / 85

background image

MAINTENANCE WORK ON CHASSIS AND ENGINE

34

9.32

Checking the chain tension

Warning

Danger of accidents

Danger caused by incorrect chain tension.

–

If the chain is over tensioned, the components of the secondary power train (chain, engine sprocket, rear sprocket, bear-
ings in transmission and rear wheel) are under additional load. Apart from premature wear, in extreme cases the chain may
snap or the countershaft of the transmission can break. On the other hand, if the chain is loose, it may jump off the engine
sprocket or the rear sprocket, causing the rear wheel to lock or damage the engine. Check for correct chain tension and
adjust if necessary.

–

Jack up the motorcycle. (

p. 20)

700483-01

–

Push the chain at the end of the chain sliding component upward to measure the
chain tension



.

Info

The upper chain section



must be taut.

Because chain wear is not always even, repeat this measurement at differ-
ent chain positions.

Chain tension

5… 8 mm (0.2… 0.31 in)

» If the chain tension does not meet specifications:

–

Adjusting chain tension - after checking. (

p. 35)

–

Remove the motorcycle from the work stand. (

p. 20)

9.33

Checking the chain tension - installing rear wheel

Warning

Danger of accidents

Danger caused by incorrect chain tension.

–

If the chain is over tensioned, the components of the secondary power train (chain, engine sprocket, rear sprocket, bear-
ings in transmission and rear wheel) are under additional load. Apart from premature wear, in extreme cases the chain may
snap or the countershaft of the transmission can break. On the other hand, if the chain is loose, it may jump off the engine
sprocket or the rear sprocket, causing the rear wheel to lock or damage the engine. Check for correct chain tension and
adjust if necessary.

700483-01

–

Make sure that the chain adjuster support plates are lying on the adjusting screws.

–

Push the chain at the end of the chain sliding component upward to measure the
chain tension



.

Info

The upper chain section



must be taut.

Because chain wear is not always even, repeat this measurement at differ-
ent chain positions.

Chain tension

5… 8 mm (0.2… 0.31 in)

» If the chain tension does not meet specifications:

–

Adjust the chain tension when installing the rear wheel. (

p. 36)

9.34

Checking rear sprocket / engine sprocket for wear

400227-01

–

Check rear sprocket / engine sprocket for wear.
» If the rear sprocket / engine sprocket are worn:

–

Replace rear sprocket / engine sprocket.

Info

When fitting the chain joint, always make sure that the closed side
of the joint faces forward (riding direction).
The engine sprocket, rear sprocket and chain should always be
replaced together.

–

Check the chain guide for tightness and wear.

«
...
34
35
36
37
38
...
»

Содержание 50 SX MINI 2010






















































































Отзывы:

Нет отзывов

Похожие инструкции для 50 SX MINI 2010

B-TRK502-02-01-SL

Бренд: SRC Страницы: 4

TroyLee Designs

Бренд: A3 HELMET Страницы: 244

V-Gard 500 Series

Бренд: MSA Страницы: 2

Бренд: J&M Страницы: 5

65175810022-00-40

Бренд: hepco & becker Страницы: 4

Бренд: Caberg Страницы: 16

Бренд: Mallory Страницы: 3

SUPERSPORT1000 2003

Бренд: Ducati Страницы: 328

Superbike 749R 2006

Бренд: Ducati Страницы: 608

Бренд: UBCO Страницы: 27

SHERCO 50 SE 2022

Бренд: SHERCO Страницы: 226

TRACER MTT9K 2019

Бренд: Yamaha Страницы: 122

TT-R125(N) 2000

Бренд: Yamaha Страницы: 508

TT-R125(R) 2002

Бренд: Yamaha Страницы: 510

Бренд: Yamaha Страницы: 610

TT-R125(S) 2003

Бренд: Yamaha Страницы: 610

Бренд: Yamaha Страницы: 616

Бренд: Yamaha Страницы: 90

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды