KTM 50 SX MINI 2010, Руководство пользователя

Страница: 25 / 85

MAINTENANCE WORK ON CHASSIS AND ENGINE
23
9.10
Installing shock absorber
x
301060-10
–
Push the splash protector

to the side and position the shock absorber according
to the desired seat height. Mount and tighten screw

.
Guideline
Screw, top shock absorber M10 45 Nm
(33.2 lbf ft)
–
Mount and tighten screw

.
Guideline
Screw, bottom shock absorber M10 45 Nm
(33.2 lbf ft)
–
Remove the motorcycle from the work stand. ( p. 20)
9.11
Vehicle level
Warning
Danger of accidents Modifications to the suspension settings can seriously alter
the vehicle's ride behavior.
–
Following modifications, ride slowly at first to get the feel of the new ride
behavior.
The vehicle level can be adjusted at the front by means of the clamping of the fork legs
and at the rear by means of the positioning of the shock absorber.
700523-10
The fork overhang can be individually adjusted to the size of the child. In the lower
position

(standard), the fork is completely pushed through. In the higher position

,
the cone is flush with the upper triple clamp.
Fork overhang over the
upper triple clamp 10… 17 mm (0.39… 0.67 in)
700521-11
The seat height can be individually adjusted to the size of the child. The shock
absorber can be mounted at two different holes in the frame.
Difference between low

(standard) and high

seat
position
25 mm (0.98 in)
9.12
Adjusting the fork overhang
x
Warning
Danger of accidents Modifications to the suspension settings can seriously alter the vehicle's ride behavior.
–
Following modifications, ride slowly at first to get the feel of the new ride behavior.
700524-01
–
Loosen screws

on the lower triple clamp.
–
Loosen screw

on the upper triple clamp.
Info
Loosen the screws to the point where the fork legs can be moved without
damaging it.
Make the adjustments first on one fork leg and then on the other.
–
Adjust the fork overhang with the upper triple clamp.
Guideline
10… 17 mm (0.39… 0.67 in)