KTM 50 SX MINI 2010, Руководство пользователя

Страница: 27 / 85

MAINTENANCE WORK ON CHASSIS AND ENGINE
25
9.15
Checking play of steering head bearing
Warning
Danger of accidents Unstable vehicle handling from incorrect steering head bearing play.
–
Adjust the steering head bearing play without delay. (Your authorized KTM workshop will be glad to help.)
Info
If the bike is ridden for a longer time with play in the steering head bearing, the bearing and the bearing seats in the frame can
be damaged after time.
–
Jack up the motorcycle. ( p. 20)
400387-10
–
Move the handlebar to the straight-ahead position. Move the fork legs to and fro in
the direction of travel.
No play should be noticeable in the steering head bearing.
» If there is noticeable play:
–
Adjust play of the steering head bearing.
x
( p. 25)
–
Move the handlebar to and fro over the entire steering range.
The handlebar must move smoothly over the entire steering range. There should
be no perceptible detent positions.
» If detent positions are noticeable:
–
Adjust play of the steering head bearing.
x
( p. 25)
–
Check the steering head bearing and replace if required.
–
Remove the motorcycle from the work stand. ( p. 20)
9.16
Adjusting play of steering head bearing
x
–
Jack up the motorcycle. ( p. 20)
–
Remove the fork legs.
x
( p. 26)
300736-10
–
Remove the fuel tank breather

.
–
Remove screws

.
–
Remove the handlebar clamp.
–
Remove the handlebar and lay it to one side.
Info
Protect the motorcycle and its attachments from damage by covering them.
Do not bend the cables and lines.
300737-10
–
Remove screws

.
–
Take off the handlebar support.
300738-11
–
Remove nut

.
–
Take off the upper triple clamp.