KTM 50 SX MINI 2010 страница 35 Скачать руководство пользователя

Страница: 35 / 85

MAINTENANCE WORK ON CHASSIS AND ENGINE

9.29

Adjusting the play in the throttle cable

700481-11

–

Move the handlebar to the straight-ahead position.

–

Push back bellows



–

Loosen nut



. Turn adjusting screw



in as far as possible.

–

Turn the adjusting screw so that there is play



at the outer casing of the throttle

cable.
Guideline

Play in gas throttle cable

3… 5 mm (0.12… 0.2 in)

–

Tighten the nut.

–

Push on bellows



. Check the throttle grip for smooth operation.

9.30

Checking chain dirt

400678-01

–

Check the chain for coarse dirt accumulation.
» If the chain is very dirty:

–

Clean the chain. (

p. 33)

9.31

Cleaning the chain

Warning

Danger of accidents

Oil or grease on the tires reduces their grip.

–

Remove oil and grease with a suitable cleaning material.

Warning

Danger of accidents

Reduced braking efficiency due to oil or grease on the brake discs.

–

Always keep the brake discs free of oil and grease, and clean them with brake cleaner when necessary.

Warning

Environmental hazard

Hazardous substances cause environmental damage.

–

Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.

Info

The service life of the chain depends largely on its maintenance.

400725-01

–

Clean the chain regularly and then treat with chain spray.

Chain cleaner (

p. 78)

Offroad chain spray (

p. 78)

Содержание 50 SX MINI 2010






















































































Результаты поиска

Содержание 50 SX MINI 2010

Отзывы:

Похожие инструкции для 50 SX MINI 2010

Бренды по названию

Популярные бренды

KTM 50 SX MINI 2010, Руководство пользователя

Результаты поиска

Содержание 50 SX MINI 2010

Отзывы:

Похожие инструкции для 50 SX MINI 2010

Бренды по названию

Популярные бренды