KTM 50 SX MINI 2010, Руководство пользователя

Страница: 18 / 85

RIDING INSTRUCTIONS
16
7.3
Starting up
Info
The plug-in stand must be removed before you start your journey.
–
Open the throttle carefully.
7.4
Shifting, riding
Info
If you hear unusual noises while riding, stop immediately, switch off the engine and contact an authorized KTM workshop.
–
If the choke function was activated, deactivate it after the engine has warmed up.
–
When you reach maximum speed after fully opening the throttle, turn back the throttle to about ¾ of its range. The speed hardly
drops, but the fuel consumption falls considerably.
–
Your child should always open the throttle only as much as the engine can handle
–
abruptly opening the throttle increases fuel
consumption.
–
Your child should switch off the engine if he or she expects to be standing for a long time.
Guideline
≥
2 min
7.5
Braking
Warning
Danger of accidents If you brake too hard, the wheels can lock.
–
Adapt your braking to the traffic situation and the road conditions.
Warning
Danger of accidents Reduced braking efficiency caused by spongy pressure point of front or rear brake.
–
Check the brake system and do not continue riding. (Your authorized KTM workshop will be glad to help.)
Warning
Danger of accidents
Reduced braking efficiency due to wet or dirty brakes.
–
Clean or dry dirty or wet brakes by riding and braking gently.
–
On sandy, wet or slippery surfaces, use the rear brake.
–
Braking should always be completed before you go into a bend.
7.6
Stopping, parking
Warning
Risk of misappropriation Usage by unauthorized persons.
–
Never leave the vehicle while the engine is running. Secure the vehicle against use by unauthorized persons.
Warning
Danger of burns
Some vehicle components get very hot when the machine is driven.
–
Do not touch hot components such as exhaust system, radiator, engine, shock absorber and brakes. Allow these compo-
nents to cool down before starting work on them.
Note
Danger of damage The parked vehicle can roll away or fall over.
–
Always place the vehicle on a firm and even surface.
Note
Fire hazard Some vehicle components get very hot when the machine is driven.
–
Do not place the vehicle where there are flammable or explosive substances. Do not place objects over the vehicle while it is still
warm from being run. Always let the vehicle cool first.