KTM 50 SX MINI 2010 Скачать руководство пользователя | Manualshive

Страница: 19 / 85

background image

RIDING INSTRUCTIONS

17

Note

Material damage

Damage and destruction of components due to excessive load.

–

The plug-in stand is designed for the weight of the motorcycle only. You or your child should not sit on the motorcycle when it is
standing on the plug-in stand. The plug-in stand and/or the frame could be damaged and the motorcycle could fall over.

–

Brake the motorcycle.

–

Press and hold the short circuit button

while the engine is idling until the engine stops.

–

Turn the knurled screw on the fuel tap all the way clockwise.

–

Park the motorcycle on firm ground.

7.7

Refueling

Danger

Fire hazard

Fuel can easily catch fire.

–

Never fill up the vehicle near open flames or burning cigarettes, and always switch off the engine first. Be careful that no
fuel is spilt, especially on hot vehicle components. Clean up spilt fuel immediately.

–

Fuel in the fuel tank expands when warm and can escape if the tank is overfilled. See specifications on filling up with fuel.

Warning

Danger of poisoning

Fuel is poisonous and a health hazard.

–

Avoid contact of the fuel with skin, eyes and clothing. Do not inhale fuel vapors. If fuel gets into your eyes, rinse imme-
diately with water and contact a doctor. Wash affected skin areas immediately with soap and water. If fuel is swallowed,
contact a doctor immediately. Change clothing that has come into contact with fuel.

Warning

Environmental hazard

Improper handling of fuel is a danger to the environment.

–

Do not allow fuel to get into the ground water, the ground, or the sewage system.

–

Switch off the engine.

–

Open the filler cap. (

p. 10)

0

0

0

A

A

400214-10

–

Fill the fuel tank with fuel up to measurement



.

Guideline

Measurement of



35 mm (1.38 in)

Fuel tank
capacity, approx.
(50 SX Mini)

2.0 l (2.1 qt.)

Super unleaded (ROZ 95 / RON 95 /
PON 91) (

p. 77)

Fuel tank
capacity, approx.
(50 SX)

2.3 l (2.4 qt.)

Super unleaded gasoline, mixed with
2-stroke engine oil (1:60) (

p. 77)

–

Close the filler cap. (

p. 11)

7.8

Filling up with oil (50 SX Mini)

Warning

Engine failure

If the vehicle is run without 2-stroke oil in the tank, the result is engine failure.

–

The oil tank must always be filled up to the

MIN

mark.

–

Switch off the engine.

–

Open the oil tank cap. (

p. 11)

700518-01

–

Fill the oil tank at least up to the

MIN

mark



.

Guideline

MIN

mark

Sufficient for a single tank filling

Oil tank contents
ca.

0.2 l (0.2 qt.)

2-stroke engine oil (

p. 76)

–

Close the oil tank cap. (

p. 11)

«
...
17
18
19
20
21
...
»

Содержание 50 SX MINI 2010






















































































Отзывы:

Нет отзывов

Похожие инструкции для 50 SX MINI 2010

Бренд: LAZER Страницы: 13

Бренд: KEEWAY Страницы: 164

Бренд: KYMCO Страницы: 55

Бренд: Takegawa Страницы: 2

SEMIFAIRING BATWING SML TOURING

Бренд: PUIG Страницы: 3

Бренд: DYNATEK Страницы: 4

Бренд: DYNATEK Страницы: 5

Бренд: Oxford Страницы: 28

RR 125 2T MY 2018

Бренд: Beta Motorcycles Страницы: 138

Бренд: Beta Страницы: 74

Бренд: Johnny Pag Страницы: 26

Бренд: Yamaha Страницы: 29

Бренд: Yamaha Страницы: 80

Бренд: Yamaha Страницы: 76

Бренд: Yamaha Страницы: 87

Бренд: Mizu Страницы: 3

Бренд: Eyelights Страницы: 15

Бренд: G6 Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды