KTM 125 SX 2010, Руководство пользователя

Страница: 585 / 899

– Screw the lock ring
1
against the shock absorber housing and
tighten it with T 1233.
Mounting the DCC mechanism
All models accept SXS 2007:
– Wet the O-ring
2
with T 158.
– Place the DCC mechansm
3
in the shock absorber housing.
– Turn the screw cap
4
in the the shock absorber housing.
– Tighten the screw cap to a torque of 50 Nm.
SXS 2007:
– Apply T 158 to the O-ring and mount the compression damping
piston
5
.
– Slip on the spring alignment
6
, see photo.
– Position the cage
7
on the HS compression control
8
.
– Position the spring
9
on the spring alignment, mount the HS
compression control
8
with the cage, making sure it is correctly
seated.
Assembling the shock absorber body
– Screw the Allen bolt in the screw retainer
bk
and assemble the
screw retainer on the tube.
– Assemble the springring
bl
past the second groove.
– Assemble the guiding bush
bm
.
– Assemble the spring ring
bn
in the upper groove of the tube.
– Slide the guiding bush over the upper spring ring and place the
second spring ring
bl
in the groove.
NOTE: does not apply to the 2007 SX/SXS models (no spring guide used).
3-16
W
orkshop Manual WP 5018 DCC with SXS/SMR
Art.Nr
.: 3.211.208-E
1
2
3
4
5
6
7
8
9
8
bk
bl
bm
bn