KTM 125 SX 2010 Скачать руководство пользователя

Страница: 185 / 899

MAINTENANCE WORK ON CHASSIS AND ENGINE

B00039-10

–

Detach air filter holder



at the bottom and swing it to one side. Remove the air

filter with the air filter support.

–

Remove the air filter from the air filter support.

11.96

Installing the air filter

301262-10

–

Mount the clean air filter onto the air filter support.

–

Grease the air filter in area



Long-life grease (

p. 132)

B00039-10

–

Put in both parts together, position them, and fix them with air filter holder



Info

If the air filter is not correctly mounted, dust and dirt can penetrate into the
engine and can cause damage.

–

Install the air filter box lid. (

p. 81)

11.97

Cleaning the air filter

Warning

Environmental hazard

Hazardous substances cause environmental damage.

–

Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.

Info

Do not clean the air filter with fuel or petroleum since these substances attack the foam.

–

Remove the air filter.

(

p. 81)

–

Wash the air filter thoroughly in special cleaning liquid and allow it to dry properly.

Air filter cleaner (

p. 132)

Info

Only press the air filter to dry it; never wring it out.

–

Oil the dry air filter with a high quality filter oil.

Oil for foam air filter (

p. 132)

–

Clean the air filter box.

–

Check the carburetor connection boot for damage and tightness.

–

Install the air filter.

(

p. 82)

Содержание 125 SX 2010




































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 125 SX 2010

Отзывы:

Похожие инструкции для 125 SX 2010

Бренды по названию

Популярные бренды

KTM 125 SX 2010, Руководство пользователя

Результаты поиска

Содержание 125 SX 2010

Отзывы:

Похожие инструкции для 125 SX 2010

Бренды по названию

Популярные бренды