KTM 125 SX 2010, Руководство пользователя

Страница: 390 / 899

Repair manual KTM 250 / 300
Art.- No. 3.206.088-E
11-12
IMPORTANT SERVICE WORK THAT MUST BE PERFORMED BY AN AUTHORIZED KTM WORKSHOP
UNDER A SEPARATE ORDER
Every 20 hours Every 40 hours Every 60 hours Every 80 hours At least once a year Every 2 years
Clean and adjust carburetor z
Replace the throttle slide, jet needle, float needle valve, needle nozzle z
Check the reed-type intake valve for wear z z z z
Check the wear on the clutch disks and length of the clutch springs z z z z
Check the cylinder and piston for wear z z z z
Check function of exhaust control z z z
Check piston pin bearing z z z z
Replace the crankshaft main bearings z
Replace the conrod bearings z z
Check the entire transmission, the shift mechanism and bearings z z
Complete maintenance of fork
z z z z
Complete maintenance of shock absorber
z z
Clean and grease steering head bearings and gasket elements
z
Replace the sealing cup for the foot brake cylinder
z z z z
Replace the glass-fiber yarn filling in the silencer
z z z z
Treat electric contacts and switches with contact grease
z
Change break fluid
z z z z z
Change the hydraulic clutch oil
z
IMPORTANT CHECKS AND MAINTENANCE TO BE CARRIED OUT BY THE RIDER
before each start after every cleaning for cross country use once a year
Check gear box oil level z
Check brake fluid level z
Check brake pads for wear z
Check lights for function z
Check horn for function
z
Lubricate and adjust cables and nipples z
Bleed fork legs regulary
z
Remove and clean dust bellows regularly z
Clean and lubricate chain, check tension and adjust if necessary z z
Clean air filter and filter box z z
Check tires for pressure and wear z
Check cooling liquid level
z
Check fuel lines for leaks z
Empty and clean float chamber z z
Remove, clean and oil the throttle slide z
Check all control elements for smooth operation z
Check brake performance
z z
Treat blank metal parts (with the exception of brake and exhaust systems) z
with wax-based anti corrosion agent
Treat ignition and steering locks and light switches with contact spray
z
Check tightness of screws, nuts and hose clamps regularly z
NOTE: If the inspection establishes that permissible tolerances are exceeded, the respective components must be replaced.