KSB Delta Primo F, Инструкция по установке и эксплуатации

Страница: 56 / 80

10 Related Documents
56 of 80
KSB Delta Primo
1983.811/02-EN
Parameter Description Factory setting Possible
settings Min.
value Max.
value Read access
right Write access
right
3-2-2-7
Edit Pump Opera. hrs
Editing pump operating
hours
- - - - Service Service
3-2-2-7.1.1 Pump number
Number of pump
1 1.. 6 1 6 Service Service
3-2-2-7.2.1 Hours
Hours
0 0.. 500000 0 500000 Service Service
3-2-2-7.2.2 Minutes
Minutes
0 0.. 59 0 59 Service Service
3-2-2-7.2.3
Seconds
Seconds
0 0 59 0 59 Service Service
3-2-2-8 Reset Sys. Oper. hrs
Resetting the operating
hours
- OK,
failed - - Service Service
3-2-3 Factory Test
Factory test
- - - - Factory Nobody
3-2-3-1 Factory Test
Factory test
- - - - Factory Factory
3-2-3-1.1.1
Test result
Test result
Failed Failed,
passed - - Factory Factory
3-3 Configuration
System configuration
- - - - Everybody Nobody
3-3-1 Number of pumps
Maximum number of pumps
used in system
3 1.. 6 1 6 Everybody Service
3-3-2 Inlet
General configuration,
suction side
Pressure switch Pressure switch,
pressure sensor,
water flow
detection,
inlet tank/gate
valve,
inlet tank/
proportional
valve - - Everybody Service
3-3-3 Discharge
General configuration,
discharge side
Cascade Cascade
(without
frequency
inverter),
1 jockey,
2 jockeys,
floating
frequency
inverter,
frequency
inverter per
pump - - Everybody Service
3-3-4 WSD
Configuring the water flow
detection for the tank
Off Off,
1 tank,
2 tanks,
3 tanks,
1 tank + temp.,
2 tanks + temp.,
3 tanks + temp.,
temperature - - Everybody Service
3-3-5 Leakage detection
Activating leakage
monitoring
Off On,
off - - Everybody Service
3-3-6 MPO Functionality
Synchronous operation
Off Off,
on - - Service Service
3-3-7 PumpMode int/ext
Setting for pump mode via
HMI (internal) or switch
(external)
)
Internal Internal,
external - - Everybody Service
3-4
System settings
Parameterisation of system
- - - - Everybody Nobody