KSB Delta Primo F, Инструкция по установке и эксплуатации

Страница: 33 / 80

7 Operation
33 of 80
KSB Delta Primo
1983.811/02-EN
NOTE
If no keys are pressed for ten minutes, the system will automatically return to the
"Standard" access level.
7.5 Displaying and changing parameters
The parameter numbers reflect the navigation path of the menu. The first digit
indicates the first menu level directly accessible via the four function keys.
Parameter list: ( ð Section 10.2, Page 52)
Table 16: Example: Displaying and changing parameter 3-5-1 (setting setpoint)
- Step 1: Logging in
1. Log in at Customer level (entering password).
( ð Section 7.4, Page 32)
ð “C” is displayed.
Step 2: Accessing menu
1. Press function key Settings (menu level 3-1).
ð 3-1 is displayed.
Step 3: Navigating
1. Press direction key until 3-5 is displayed.
2. Press OK to confirm selection.
ð 3-5-1 is displayed.
Step 4: Changing the parameter value
1. To change the parameter value, press OK a second time.
2. To change the numerical value, press the direction key.
ð Changes are made from left to right. The bar above the entry
displays the value currently being entered in relation to the
value range.
Step 5: Confirming value
1. Press OK to confirm changed value.
ð
The cursor moves to the next position (second position from the
left).
Step 6: Confirming value
ü
The parameter value has been successfully changed.
1. Press OK to save new parameter values.
Step 7: Leaving the parameter menu
1. To leave the parameter menu, press ESC several times.
ð
The main display is shown.
ð The new setpoint is active.