KSB Delta Primo F, Инструкция по установке и эксплуатации

Страница: 55 / 80

10 Related Documents
55 of 80
KSB Delta Primo
1983.811/02-EN
Parameter Description Factory setting Possible
settings Min.
value Max.
value Read access
right Write access
right
3-1-1-3-2
Height
Units of tank fill level
cm cm,
m - - Everybody Service
3-1-1-3-3 Temperature
Units of water flow detection
temperature
°C °C,
°F - - Everybody Service
3-1-2 Fieldbus
Field bus settings
- - - - Nobody Nobody
3-1-2-1 Fieldbus Type
Type of connected field bus
module
No module No module,
Profibus,
Modbus - - Nobody Nobody
3-1-4 Logo
Setting the logo displayed
- - - - Service Nobody
3-1-4-1 Logo
Selecting the logo displayed
No logo KSB logo,
dp logo,
no logo - - Service Service
3-2 Device
Device-specific settings
- - - - Everybody Nobody
3-2-1
Login
Login
- - - - Everybody Nobody
3-2-1-1.1 PIN
Entering the user level and
password
- - - - Everybody Nobody
3-2-1-1.1.1 Access Level
Selecting the login level
User level User level,
service level,
factory level - - Everybody Everybody
3-2-1-1.1.2
PIN acceptance
Prompt to enter PIN
- 0.. 9999 0 9999 Everybody Everybody
3-2-1-1.2 PIN
Entering the user level and
password
- - - - Factory Nobody
3-2-1-1.2.1 Access Level
Selecting the login level
User level User level,
service level,
factory level,
development
level - - Factory Factory
3-2-1-1.2.2
PIN acceptance
Prompt to enter PIN
- 0.. 9999 0 9999 Factory Factory
3-2-1-2 Login required
Password entry required
Yes No,
yes - - Customer Customer
3-2-2
Service
Service settings
- - - - Customer Nobody
3-2-2-1 Factory setting
Factory-set defaults
- Reset ok,
no set available - - Customer Customer
3-2-2-2 Reset Srv Interval
Resetting the service
interval
- OK,
failed - - Service Service
3-2-2-3 Customer setting
Loading locally saved
settings
- Reset ok,
no set available - - Customer Customer
3-2-2-4 Save custom. setting
Saving the customer
settings
- - - - Customer Customer
3-2-2-5 Save factory setting
Saving the factory settings
- - - - Factory Factory
3-2-2-6 Default setting
Resetting to default settings
- - - - Service Service
3-2-2-6.1.1
Reset default param.
Resetting to default settings
default Default,
Hyamat K,
Hyamat V,
Hyamat SVP,
HyaEco VP - - Service Service