
VI
Preface
Scaler /Polisher unit is developed based on the Principle of piezoelectric
Ultrasonic waves are generated in the handpiece by 4 ceramic piezoelectric plates
subjected to high frequency alternation current. The Tip is vibrated back and forth
in high speed to perform tooth calculus and/or tartar cleaning task. Particularly,
the high speed vibrated Tip can remove the toughest calculus and tartar easily, and
in conjunction with syringe (or saliva ejector), the scaler can conveniently and
swiftly clean teeth and most importantly it is proven to be electrically safe. The
electric-mechanical efficiency of this piezoelectric system is much greater than that
of traditional magnetostrictive systems. There is very little heat released, and it is
possible to work with very little spray. It’s sufficient to ensure excellent cavitation
but more comfortable for both the patient and the dental surgeon.
The ART-SP2 is a very powerful apparatus. There are linear scales of
power adjustment for removing prostheses and condensing gutta-percha. This
allows very fine adjustment to suit each clinical situation.
With a large range of Tips, the ART-SP2 is suitable for different kinds of work.
ART-SP2
Operation Frepuency:29 KHz
Stable and Fine Power Setting
Various Types of TIP Available
No Heat Generation of Handpiece
Automatic Feedback Control and Powerful Torque
High Torque Feature even at the Speed condition
0~2,000 RPM of Speed Control
Scaler and Polisher in one Equipment
Special notes to doctor:
Since the TIP of scaler is made of stainless steel, avoid direct contact to patient's
teeth; it may damage to the enamel of the teeth. To better utilize all the functions
and maximize the performance of the scaler, it is suggested that before using on
patients, doctors should practice on models/aluminum plates to familiarize
themselves with the usage of the scaler tips and the subtle motion and force of the
insert, etc.