
Description of Control Panel
The function of each button or knob on the control panel is listed detail below.
1
2
Figure
2.
ART-SP2
Front-panel
1. M
AIN
P
OWER
S
WITCH
Indicating the main power switch. When pushed, the AC power is sent to
the Main Unit, and the power indicator (LED) will be lit up. If pushed
again, the power is then turned off and the power indicator will be
extinguished.
Before turning the unit on, be sure the footswitch is in
the “OFF” position
2. W
ATER
Indicating the water volume control knob. When turned clockwise, the
water volume comes out of the Handpiece will be smaller. On the other
hand, if turned counter-clockwise, the water volume will increase. With
this water volume control knob, doctors can conveniently adjust water
volume based on the operation needs. It is noted that not only washing
away the dirt left from the calculus and/or tartar, water here is also used to
cool down the temperature of the Tip to avoid overheating. Adjustment of
water flow rate controls water temperature. The greater the water flows,
the lower the water temperature, vice versa.
Warning:
Don’t adjust water knob in anti-clockwise direction
over three circles
3. P
OWER
Indicating the output power intensity control knob. When turned
clockwise, the output power intensity will be smaller. On the other hand,
when turned counter-clockwise, the output power intensity will increase.
This power intensity control knob gives doctors the flexibility to adjust the
output power intensity based on the difficulty of the cleaning job (e.g.,
toughness of the calculus).
3 4
!
4