
1. Check ART-SP2 and make sure the both power and power indicator is off
when the switch is off.
2. Put the scaler into a grounded outlet.
3. Choose the correct scalering Tip for desired procedure, and insert it into the
handpiece. Make sure the insertion is complete.
Caution
:
When screwing the Tip into the handpiece, DO NOT FORCE.
4. Make sure the water PU tube is connected well.
5. Connect the proper micro-motor
Several installation suggestions are listed below.
1.
Because patients may experience some tissue trauma during the treatment,
it is suggested that the operator use purified or distilled water. This will
significantly reduce the possibility of infection.
2.
After installation, the extra length of the power cord should be neatly
arranged to avoid any tripping accidents.
3.
The footswitch should be firmly placed at position where the users/doctors
can easily access it. Any extra cord to the footswitch extension should also be
neatly arranged to avoid any tripping accidents.
8