
V. Maintenance
The Bonart unit does not need special maintenance routines but it does need to be
regularly and thoroughly cleaned and sterilized (as described in next section).
Daily start-up
When starting the unit at the beginning of the day:
*Open the water supply shut-off valve.
*Push the MAIN POWER SWITCH to light the on indicator (LED)
Note: If no water come out, please check the water supply.
Note: If power LED does not light, please contact local authorized agent.
Daily shut-off
When stopping the unit at the end of the day:
*Push the POWER SWITCH to turn the unit off.
*Turn off the water supply shut-off valve.
Preparing to treat a patient
*Make sure the TIP has been sterilized.
The following suggestions are also useful in extending the product life of the unit.
A. Place the Main Unit in an open area where air can flow freely around it.
B. If need to move the Main Unit, handle with care.
C. Before leaving the operatory, make sure the AC power is turned off and the
water faucet is tightly closed.
D. After six months or if you find the output power of the Handpiece is not
enough to perform treatment, it is very possible that the Tip is worn out. If the
Tip is worn out, replace it with a new one, otherwise, have your authorized agent
service the system.
E. Customer Service: if service is needed, please contact local authorized agent.
Trouble shooting
Product requires any maintenance should be returned to the customer service
department or authorized service facility. Bonart will repair or replace any
product under warranty at no charge.
13