
5. Water and Temperature
The WATER KNOB control the volume and temperature of water flowing
from the Handpiece by turning the WATER KNOB clockwise or
counterwise until the desired rate of flow is obtained.
When preparing to execute “Polishing” model:
1. Check the micro-motor connection and pushed the “MICRO MOTOR”
change to “Polishing” model.
2. The “Forward / Reverse” that locates rear panel is controlling the micro-
motor revolving direction.
Note: The greater the water flow, the cooler the temperature and vice versa.
Caution: When operating, a continuous flow of water is required to keep the
Handpiece cool.
12