Krone Swadro TC 880 Скачать руководство пользователя страница 88 | Manualshive

Страница: 88 / 128

Krone Swadro TC 880 Скачать руководство пользователя страница 88

Maintenance

88

13 Maintenance

WARNING!
If the basic safety instructions are not followed, people may be seriously injured or
killed.

•

To avoid accidents, the basic safety instructions in the chapter Safety must have been
read and followed, see chapter Safety "Basic safety instructions".

WARNING!
If the safety routines are not adhered to, people may be seriously injured or killed.

•

To avoid accidents, the safety routines in the chapter Safety must be read and followed,
see chapter Safety "Safety routines".

13.1

Spare Parts

Warning! - Using non-approved spare parts.

Effect: Danger to life, serious injuries or loss of warranty claims as well as exclusion of liability
•

Use only authentic KRONE spare parts and accessories authorised by the manufacturer.
The use of spare parts, accessories or additional equipment not manufactured, tested or
approved by KRONE will exclude any liability for consequential damage.

Note

To ensure problem-free operation of the machine and to reduce wear and tear, specific
maintenance and upkeep intervals must be observed. These include cleaning, greasing,
lubricating and oiling parts and components.

«
...
86
87
88
89
90
...
»

Содержание Swadro TC 880

































































































































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды