Krone Swadro TC 880 Скачать руководство пользователя страница 23

Страница: 23 / 128

Safety

4.5.3

Coupling the machine safely

WARNING!
Risk of injury while hitching the machine

While hitching the machine to the tractor, the machine or machine parts may move
unintentionally. As a result, people may be seriously injured or killed.
•

Follow the correct steps while hitching the machine.

•

While hitching the machine to the tractor, never stand between the tractor and the machine.

•

Depressurise the tractor hydraulics.

•

Shut down and safeguard the machine, see chapter Safety, "Shutting down and
safeguarding the machine".

•

Connect the hydraulic hose lines only if the hydraulic systems of the tractor and machine
are depressurised.

•

Connect and secure the universal shaft.

•

Connect the lighting cable.

•

Connect the power cable.

4.5.4

Uncoupling the machine safely

WARNING!
Risk of injury while unhitching the machine

While unhitching the machine, the machine or machine parts may move unintentionally. As a
result, people may be seriously injured or killed.
•

Follow the correct steps below while unhitching the machine:

•

Shut down and safeguard the machine, see chapter Safety, "Shutting down and
safeguarding the machine".

•

Lower the parking support.

•

Depressurise the tractor hydraulics.

•

Disconnect the hydraulic hose lines only if the hydraulic systems of the tractor and machine
are depressurised.

•

Disconnect the lighting cable from the tractor.

•

Disconnect the universal shaft and place it on the holder provided.

•

While unhitching the machine from the tractor, never stand between the tractor and the
machine.

Содержание Swadro TC 880

































































































































Результаты поиска

Содержание Swadro TC 880

Отзывы:

Бренды по названию

Популярные бренды

Krone Swadro TC 880, Руководство по эксплуатации

Результаты поиска

Содержание Swadro TC 880

Отзывы:

Бренды по названию

Популярные бренды