Krone Swadro TC 880 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 128

Krone Swadro TC 880 Скачать руководство пользователя страница 12

Safety

12

4.4.6 Additional

equipment and spare parts

Additional equipment and spare parts, which do not comply with the requirements of the
manufacturer, may impair the operational safety of the machine and cause accidents.
•

To ensure operational safety, use original or standard parts which comply with the
requirements of the manufacturer. If in doubt, have parts verified by the dealer or
manufacturer.

4.4.7

Workstations and passengers

Control of the moving machine

The moving machine requires the driver to react quickly at any time. Otherwise, the machine
may move in an uncontrolled manner and seriously injure or kill people.
•

Start the engine from the driver's seat only.

•

Never leave the driver's seat while the machine is moving.

•

Never climb in or out of the machine while it is moving.

Passengers

Passengers may be seriously injured by the machine or fall off the machine and get run over.
Ejected objects may strike and injure passengers.
•

Never let people ride on the machine.

4.4.8

Operational safety: Technically perfect condition

Operation only when the machine has been started up correctly

If the machine is not started up correctly according to these operating instructions, the
operational safety of the machine is not ensured. As a result, accidents may occur and people
may be seriously injured or killed.
•

Do not use the machine unless it has been started up correctly, see chapter Start-up.

Technically perfect condition of the machine

Improper maintenance and adjustment may affect the operational safety of the machine and
cause accidents. As a result, people may be seriously injured or killed.
•

Perform all maintenance and adjustment work according to the chapters Maintenance and
Adjustment.

•

Before performing any maintenance or adjustment work, shut down and safeguard the
machine, see chapter Safety "Shutting down and safeguarding the machine".

«
...
10
11
12
13
14
...
»

Содержание Swadro TC 880

































































































































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды