manualshive.com logo in svg

Krone Swadro TC 880, Руководство по эксплуатации

Поделиться
Скачать
Krone Swadro TC 880 Скачать руководство пользователя страница 32

Machine Description

 

 

32 

 

 

5.2 

Identification Plate  

 

1

SW9000001_2

Fig.4 
The machine data can be found on type plate (1). 

 

5.3 

Information Required for Questions and Orders  

 

Type  

Year of manufacture 

 

Vehicle ID number 

 

 

 

Note 

The entire identification plate represents a legal document and should not be altered or 
rendered illegible! 

 

When asking questions concerning the machine or ordering spare parts, be sure to provide type 
designation, vehicle ID number and the year of manufacture : To ensure that these data are 
always available, we recommend that you enter them in the fields above. 
 

 

Note 

Authentic KRONE spare parts and accessories authorised by the manufacturer help to ensure 
safety. The use of spare parts, accessories and other devices which are not manufactured, 
tested or approved by KRONE will result in the revoking of the liability for damages resulting 
thereof. 

 

 

5.3.1 Contact 

 

 

 
Maschinenfabrik Bernard Krone GmbH 
Heinrich-Krone-Strasse 10 
D-48480 Spelle (Germany) 
 
Telephone: + 49 (0) 59 77/935-0 (Head Office) 
Fax.: + 49 (0) 59 77/935-339 (Head Office) 
Fax.: + 49 (0) 59 77/935-239 (Spare parts - domestic) 
Fax.: + 49 (0) 59 77/935-359 (Spare parts - export) 
Email: 

[email protected]

 

 

Содержание Swadro TC 880

































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды