manualshive.com logo in svg

Krone Swadro TC 880, Руководство по эксплуатации

Поделиться
Скачать
Krone Swadro TC 880 Скачать руководство пользователя страница 11

 

Safety

 

11 

 

 

4.4.2 Personnel 

qualification 

 

 

If the machine is not used properly, people may be seriously injured or killed. To avoid 
accidents, each person who works with the machine must satisfy the following minimum 
requirements: 
– 

He is physically capable of controlling the machine. 

– 

He can work safely with the machine in accordance with these operating instructions. 

– 

He understands the method of operation of the machine within the scope of his work and 
can identify and avoid the dangers associated with the work. 

– 

He has read the operating instructions and can implement the information in the operating 
instructions accordingly. 

– 

He is familiar with driving vehicles safely. 

– 

For road travel he has adequate knowledge of the highway code and has the stipulated 
driving licence. 

 

 

4.4.3 

Children in danger  

 

Children cannot assess danger and behave unpredictably. 
As a result, children are especially at risk. 
• 

Keep children away from the machine. 

• 

Keep children away from consumables. 

• 

Especially before starting up and moving the machine, ensure that there are no children in 
the danger zone. 

 

 

4.4.4 Coupling 

 

If the tractor and the machine are not correctly connected, there is a risk of causing serious 
accidents. 
• 

When connecting front attachments or trailers, follow all operating instructions: 
– 

The operating instructions for the tractor 

– 

The operating instructions for the machine 

– 

The operating instructions for the universal shaft 

• 

Follow the coupling instructions, see chapter on starting up "Connect the machine to the 
tractor". 

• 

Note the modified driving behaviour of the combination. 

 

 

4.4.5 

Structural changes to the machine  

 

Structural changes and enhancements may impair the functionality and operational safety of the 
machine. As a result, people may be seriously injured or killed. 
• 

Have structural changes and enhancements performed by an authorised service centre 
only. 

 

Содержание Swadro TC 880

































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды