manualshive.com logo in svg

Krone Swadro TC 880, Руководство по эксплуатации

Поделиться
Скачать
Krone Swadro TC 880 Скачать руководство пользователя страница 18

Safety

 

 

18 

 

 

4.4.14 

Parking the machine safely  

 

The parked machine may overturn. People may be crushed and killed. 
• 

Park the machine on a stable and even surface. 

• 

Before adjusting, repairing, servicing or cleaning the machine, ensure that it is securely 
positioned. If in doubt, support the machine. 

• 

In the chapter Driving and transportation note the section "Parking the machine". 

 

 

Unattended parking 

Adults and playing children are at risk from an inadequately secured and unattended parked 
machine. 
•  Before switching off the machine: Shut down and safeguard the machine, see chapter 
Safety, "Shutting down and safeguarding the machine". 
 

 

4.4.15 Consumables 

 

Unsuitable consumables 

Consumables which do not comply with the requirements of the manufacturer, may impair the 
operational safety of the machine and cause accidents. 
• 

Use only consumables which comply with the requirements. 

For the requirements of fuels, see chapter Description of machine, "Consumables". 
 

 

Protection of the environment and disposal 

Consumables such as diesel fuel, brake fluid, antifreeze and lubricants may damage the 
environment and the health of people. 
• 

Do not release consumables into the environment. 

• 

Absorb leaked consumables with an absorbent material or with sand, place in a liquid-tight 
labelled container and dispose of according to the official regulations. 

 

Содержание Swadro TC 880

































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды