manualshive.com logo in svg

Krone Swadro TC 880, Руководство по эксплуатации

Поделиться
Скачать
Krone Swadro TC 880 Скачать руководство пользователя страница 24

Safety

 

 

24 

 

 

4.5.5 

Preparing the machine for repair, maintenance and adjustment work 

 

 

WARNING! 
Risk of injury during repair, maintenance and adjustment work on the machine. 

If the machine has not been shut down, the machine or machine parts may move 
unintentionally. As a result, people may be seriously injured or killed. 
If the machine is not supported securely, the machine or machine parts may roll, fall or drop. As 
a result, people may be seriously injured or killed. 
• 

Before starting repair, maintenance and adjustment work, perform the following steps: 

 
• 

Shut down and safeguard the machine, see chapter Safety, "Shutting down and 
safeguarding the machine". 

• 

The raised machine or machine parts must be securely supported, see chapter Safety 
"Securely supporting the raised machine and machine parts". 

 

 

4.5.6 

Starting the machine safely  

 

 

WARNING! 
Risk of injury while starting up the machine 

If the machine has not been safely placed in operation, the machine or machine parts may 
move unintentionally. As a result, people may be seriously injured or killed. 
• 

Make certain before starting up the machine that the following requirements are met: 

 
– 

The hydraulic lines are connected. 

– 

The universal shaft is connected and secured. 

– 

The lighting system is connected. 

– 

The safety chain is in place (not provided in all countries). 

– 

All safety equipment is in place, is proper condition, and in the protective position. 

– 

The PTO speed of 540 rpm is not exceeded. 

– 

The universal shaft recommended by the manufacturer is being used. 

– 

The hoses, cables and ropes are laid so that they do not scrape, come under tension or 
become jammed or come in contact with other parts (such as the tractor tyres). 

– 

The machine parts of the tractor do not come in contact with the machine parts of the 
machine (especially when cornering). 

– 

There are no persons in the machine danger zone. 

Содержание Swadro TC 880

































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды