Krone Swadro TC 880, Руководство по эксплуатации

Страница: 15 / 128

Safety
15
Danger zone between tractor and machine
People standing between the tractor and machine may be seriously injured or killed if the tractor
rolls away or by machine movements:
•
Before starting all work between the tractor and machine: • Shut down and safeguard
the machine, see chapter Safety, "Shutting down and safeguarding the machine". This also
applies to brief inspection work. Many serious accidents occur due to negligence and
running machines.
• If the power lifter has to be actuated, keep all people away from the area of movement of
the power lifter.
Danger zone when drive switched on
When the drive is switched on, there is a danger to life from rotating and swivelling machine
parts. There must be nobody in the danger zone of the machine.
•
Before starting the machine, direct all people out of the danger zone of the machine.
• If a hazardous situation arises, switch off drives and diesel engine immediately.
Danger zone of the P.T.O. shaft
People may be caught, pulled in and seriously injured by the PTO shaft and the driven
components.
Before engaging the PTO shaft:
•
Make sure that all safety devices are fitted and in the protection position.
• Ensure that the selected speed and direction of rotation of the PTO shaft match the
permitted speed and direction of rotation of the machine.
• Ensure that nobody is in the danger zone of the PTO shaft or the universal shaft.
• If the angles are too large, switch off the PTO shaft. The machine may be damaged. Parts
may be flung out and cause injury to persons.
• If the PTO shaft is not required, switch off the PTO shaft.
Danger zone universal shaft
People may become caught by the universal shaft, pulled in and seriously injured.
•
Ensure that the universal shaft guards are attached and functional.
• Ensure that nobody is in the danger zone of the PTO shaft or the universal shaft.
• Provide the section tube and universal shaft guards with adequate cover.
• Allow the universal shaft locks to engage.
• Attach the chains to prevent the universal shaft guards from rotating with the shaft.
• Follow the operating instructions for the universal shaft.
Danger zone due to coasting machine parts
When the drives have been switched off, the following machine parts will coast:
– Universal
shaft
– Rotor
When machine parts are coasting, people may be seriously injured or killed.
Shut down and safeguard the machine, see chapter Safety, "Shutting down and safeguarding
the machine".
• Do not touch machine parts until they have come to a standstill.