manualshive.com logo in svg

Krone Swadro TC 680, Оригинальная инструкция по эксплуатации, Страница: 91 / 138

Поделиться
Скачать
Krone Swadro TC 680 Скачать руководство пользователя страница 91

 

Settings

 

91 

 

Pos: 36.1 /Überschriften/Überschriften 1/A-E/Einstellungen @ 0\mod_1199868783862_78.docx @ 36141 @ 1 @ 1 

 

11 Settings 

 

Pos: 36.2 /BA/Sicherheit/2. Vorangestellte Warnhinweise/WARNUNG - Nichtbeachtung der grundlegenden Sicherheitshinweise alte Form @ 254\mod_1397485793575_78.docx @ 1953347 @  @ 1 

 

 

WARNING! 
If the basic safety instructions are not followed, people may be seriously injured or 
killed.  

• 

To avoid accidents, the basic safety instructions in the chapter Safety must have been 
read and followed, see chapter Safety "Basic safety instructions". 

 

Pos: 36.3 /BA/Sicherheit/2. Vorangestellte Warnhinweise/WARNUNG - Nichtbeachtung der Sicherheitsroutinen alte Form @ 273\mod_1404117435996_78.docx @ 2058712 @  @ 1 

 

 

WARNING! 
If the safety routines are not adhered to, people may be seriously injured or killed.  

• 

To avoid accidents, the safety routines in the chapter Safety must be read and followed, 
see chapter Safety "Safety routines". 

 

Pos: 36.4 /BA/Sicherheit/7. Gefahrenhinweise alt/Wender/Gefahr - Verletzung Augen KWT 2000 @ 105\mod_1332839720321_78.docx @ 948523 @  @ 1 

 

 

WARNING! - Working in the area of the rotor tines! 

Injuries to eyes due to rotors tines. 
• 

Wear protective goggles when working in the vicinity of the rotor tines. 

 

Pos: 36.5 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Содержание Swadro TC 680











































































































































Отзывы:

Нет отзывов