manualshive.com logo in svg

Krone Swadro TC 680, Оригинальная инструкция по эксплуатации, Страница: 88 / 138

Поделиться
Скачать
Krone Swadro TC 680 Скачать руководство пользователя страница 88

Driving and Transport

 

 

88 

 

Pos: 34.7 /Überschriften/Überschriften 2/U-Z/VVorbereitungen zur Straßenfahrt @ 25\mod_1244092605963_78.docx @ 254666 @ 2 @ 1 

 

10.1 

Preparations for road travel  

Pos: 34.8 /BA/Fahren und Transport/SchwaderPrüfen Sie vor der Straßenfahrt, dass  Swadro TC 680_TC 760 @ 505\mod_1498745830034_78.docx @ 3474589 @  @ 1 

 

SW700063

1

2

SW700062_1

Fig. 56 

Before road travel, make certain  

• 

the machine is fully and correctly hitched. 

• 

the PTO shaft is switched off and the rotors have come to a complete stop. 

• 

the rotors are locked. 

• 

the outrigger arms are fully retracted, 

for the “hydraulic working width adjustment” 

version.

 

• 

the operation panel is switched off, 

for the “electrical/hydraulic single-rotor lifting 

mechanism”.

 

• 

the stop cock of the additional rotor is closed, 

for the “additional rotor” version.

 

• 

the machine is in the transport position. 

• 

all hydraulic control units are in neutral position. 

• 

the retaining bolts are correctly engaged in the lockings (1). 

• 

the tine guards (2) have been plugged onto the tines located in transport position below 2 
m. 

• 

the lighting system works. 

• 

the lower links are lowered to a height of 35 cm to the ground to maintain the transport 
height. 

Pos: 34.9 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Содержание Swadro TC 680











































































































































Отзывы:

Нет отзывов