manualshive.com logo in svg

Krone Swadro TC 680, Оригинальная инструкция по эксплуатации, Страница: 48 / 138

Поделиться
Скачать
Krone Swadro TC 680 Скачать руководство пользователя страница 48

Commissioning

 

 

48 

 

Pos: 28.1 /Überschriften/Überschriften 1/A-E/Erstinbetriebnahme @ 0\mod_1196314201498_78.docx @ 5855 @ 1 @ 1 

 

7 Commissioning 

 

Pos: 28.2 /BA/Sicherheit/7. Gefahrenhinweise alt/ErstinbetriebnahmeWarnung - Erstinbetriebnahme nur von autorisierter Fachperson (2017-08-03 13:37:39) @ 111\mod_1336724783740_78.docx @ 987284 @  @ 1 

 

 

WARNING!  
Risk of accident or damage to the machine due to an incorrect initial operation! 

Only an authorized service technician is permitted to carry out the initial operation. 

 

Pos: 28.3 /BA/Sicherheit/2. Vorangestellte Warnhinweise/WARNUNG - Nichtbeachtung der grundlegenden Sicherheitshinweise alte Form @ 254\mod_1397485793575_78.docx @ 1953347 @  @ 1 

 

 

WARNING! 
If the basic safety instructions are not followed, people may be seriously injured or 
killed.  

• 

To avoid accidents, the basic safety instructions in the chapter Safety must have been 
read and followed, see chapter Safety "Basic safety instructions". 

 

Pos: 28.4 /BA/Sicherheit/2. Vorangestellte Warnhinweise/WARNUNG - Nichtbeachtung der Sicherheitsroutinen alte Form @ 273\mod_1404117435996_78.docx @ 2058712 @  @ 1 

 

 

WARNING! 
If the safety routines are not adhered to, people may be seriously injured or killed.  

• 

To avoid accidents, the safety routines in the chapter Safety must be read and followed, 
see chapter Safety "Safety routines". 

 

Pos: 28.5 /BA/Sicherheit/2. Vorangestellte Warnhinweise/Warnung - Maschine sicher abstellen ohne Traktor_Unterlegkeile @ 278\mod_1404972644211_78.docx @ 2083305 @  @ 1 

 

 

WARNING! 
Risk of injury due to the unsecured machine rolling away! 

If the machine is not secured against rolling away when it has been switched off, there is a risk 
of people being injured by the machine rolling away in an uncontrolled manner. 
• 

Secure the machine against rolling away with wheel chocks. 

 

Pos: 28.6 /BA/Sicherheit/6. Überarbeitete Warnhinweise/Hinweis - Vor der Erstinbetriebnahme den Ölstand kontrollieren @ 469\mod_1470668635189_78.docx @ 3167988 @  @ 1 

 

 

Note 

Before placing the machine in operation for the first time, the oil level must be checked in all 
gearboxes. 

 

Pos: 28.7 /Überschriften/Überschriften 2/A-E/EErstmontage @ 1\mod_1202226261982_78.docx @ 58270 @ 2 @ 1 

 

7.1 

First installation  

Pos: 28.8 /BA/Erstinbetriebnahme/Erstmontage @ 1\mod_1202224111998_78.docx @ 58190 @  @ 1 

The document "Assembly Instructions" describes how to install the device for the first time. 

Pos: 28.9 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Содержание Swadro TC 680











































































































































Отзывы:

Нет отзывов