Krone Swadro TC 680 Скачать руководство пользователя страница 59

Страница: 59 / 138

Start-up

Pos: 30.38 /Überschriften/Überschriften 2/A-E/BBedienung anschließen @ 302\mod_1414049404753_78.docx @ 2355806 @ 2 @ 1

8.5

Connecting the Operation

Pos: 30.39 /Abkürzungen /Bei Variante Plus @ 302\mod_1414047391014_78.docx @ 2355775 @ @ 1

In case of Plus version

Pos: 30.40 /BA/Inbetriebnahme/Schwader/Hinweis Sauberkeit der Stecker und Steckdosen @ 2\mod_1202399563131_78.docx @ 59273 @ @ 1

Note

Before inserting the plugs, make certain the plugs and sockets are clean and dry. Dirt and
moisture may result in short circuits!

Pos: 30.41 /BA/Inbetriebnahme/Schwader/Anschluss elektrische Bedienung/Anschluss elektrische Bedienung Swadro TC 680_760 @ 302\mod_1414052075029_78.docx @ 2355917 @ @ 1

SW700089

Fig. 28
The connection for operation is made via power supply cable (1).

Note

If need be, mount socket for power supply and support for operation panel on the tractor
beforehand.

To do this:
•

Connect power supply cable (1) with socket for power supply (2) to tractor and with socket
(3) to the machine.

•

Insert the plug of the operation panel into the appropriate socket (4) of the machine.

•

Lay the cables so that they do not touch the wheels.

Pos: 30.42 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1

Содержание Swadro TC 680











































































































































Результаты поиска

Содержание Swadro TC 680

Отзывы:

Krone Swadro TC 680, Оригинальная инструкция по эксплуатации, Страница: 59 / 138

Результаты поиска

Содержание Swadro TC 680

Отзывы: