Krone Swadro TC 680 Скачать руководство пользователя страница 65

Страница: 65 / 138

Operation

Pos: 32.15 /Überschriften/Überschriften 3/A-E/B/Bei Ausführung mit hydraulischer Einkreiselaushebung @ 77\mod_1310050459478_78.docx @ 667495 @ 3 @ 1

9.2.2

For design with hydraulic single-rotor lifting mechanism

Pos: 32.16 /BA/Bedienung /Schwader/Kreiselarme senken/heben/Kreiselarme senken hydraulische Einkreiselaushebung SW TC 680_760 @ 214\mod_1390381679853_78.docx @ 1755064 @ @ 1

SW700066_1

Fig. 34
•

Insert the hydraulic control unit (4) into the bracket in the tractor cabin.

•

Switch the switching valve (3) to the central position (II).

•

Switch on the tractor.

•

To relieve the locks (1), actuate the single-action control unit at the tractor and pressurise
the hydraulic cylinders.

•

To release the locks

(1), pull the actuating rope

(2) and keep it tensioned.

•

Set the single-action control unit (red 1+) of the tractor to the float position.

•

When the rotors are in the working position, release the actuating rope (2).

•

Switch off the tractor and secure it against the possibility of rolling back.

Pos: 32.17 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1

Содержание Swadro TC 680











































































































































Результаты поиска

Содержание Swadro TC 680

Отзывы:

Krone Swadro TC 680, Оригинальная инструкция по эксплуатации, Страница: 65 / 138

Результаты поиска

Содержание Swadro TC 680

Отзывы: