manualshive.com logo in svg

Krone Swadro TC 680, Оригинальная инструкция по эксплуатации, Страница: 63 / 138

Поделиться
Скачать
Krone Swadro TC 680 Скачать руководство пользователя страница 63

 

Operation

 

63 

 

Pos: 32.1 /Überschriften/Überschriften 1/A-E/Bedienung @ 0\mod_1199789505403_78.docx @ 34825 @ 1 @ 1 

 

9 Operation 

 

Pos: 32.2 /BA/Sicherheit/2. Vorangestellte Warnhinweise/WARNUNG - Nichtbeachtung der grundlegenden Sicherheitshinweise alte Form @ 254\mod_1397485793575_78.docx @ 1953347 @  @ 1 

 

 

WARNING! 
If the basic safety instructions are not followed, people may be seriously injured or 
killed.  

• 

To avoid accidents, the basic safety instructions in the chapter Safety must have been 
read and followed, see chapter Safety "Basic safety instructions". 

 

Pos: 32.3 /BA/Sicherheit/2. Vorangestellte Warnhinweise/WARNUNG - Nichtbeachtung der Sicherheitsroutinen alte Form @ 273\mod_1404117435996_78.docx @ 2058712 @  @ 1 

 

 

WARNING! 
If the safety routines are not adhered to, people may be seriously injured or killed.  

• 

To avoid accidents, the safety routines in the chapter Safety must be read and followed, 
see chapter Safety "Safety routines". 

 

Pos: 32.4 /BA/Bedienung /Schwader/Achtung Maschine ist für Vorwärtsfahrt konzipiert. @ 291\mod_1410427944026_78.docx @ 2294406 @  @ 1 

 

 

CAUTION! - Do not drive in reverse when using the machine for work. 

Effect: Damage to the machine. 
The machine is designed to travel forwards. Never reverse while the machine is in switched on 
and in working position. Lift rotors first. 

 

Pos: 32.5 /Layout Module /----------------Leerzeile-------------------- @ 240\mod_1395147357027_0.docx @ 1890988 @  @ 1 

 

 

Pos: 32.6 /Überschriften/Überschriften 2/U-Z/ZZinkenschutze von den Zinkenspitzen entfernen @ 36\mod_1262940295076_78.docx @ 338395 @ 2 @ 1 

 

9.1 

Removing the tine protections from the tine tips  

Pos: 32.7 /BA/Bedienung /Schwader/Zinken / Zinkenarme/Zinkenschutze entfernen SW TC 680_760 @ 213\mod_1389957184427_78.docx @ 1748378 @  @ 1 

 

1

SW700064_1

3

2

1

Fig. 32 
• 

Turn off the tractor and secure it against the possibility of rolling back. 

• 

Remove the tine guards (1) from the machine. 

• 

Insert the tine guards into the support (2) and secure them with linch pins (3). 

• 

Repeat this process for the other machine side. 

 

Pos: 32.8 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Содержание Swadro TC 680











































































































































Отзывы:

Нет отзывов