manualshive.com logo in svg

Krone Swadro TC 680, Оригинальная инструкция по эксплуатации, Страница: 78 / 138

Поделиться
Скачать
Krone Swadro TC 680 Скачать руководство пользователя страница 78

Operation

 

 

78 

 

Pos: 32.78 /Überschriften/Überschriften 2/A-E/AAuslegearme in Transportstellung anheben @ 303\mod_1414129961702_78.docx @ 2356737 @ 2 @ 1 

 

9.10 

Raising Outrigger Arms into Transport Position  

Pos: 32.79 /BA/Sicherheit/7. Gefahrenhinweise alt/SchwaderAchtung - Ausheben der Kreisel Zapfwelle abschalten @ 379\mod_1443716746754_78.docx @ 2746404 @  @ 1 

 

 

 

 

 

 

 

 

CAUTION! 

Before swivelling into transport position, turn off the PTO shaft. 
• 

Before lifting the rotors from the headland position, turn off PTO shaft and wait for rotors to 
come to a standstill. 

• 

Ensure that nobody is in the swivel range of the rotors. 

• 

Ensure that nobody is in the swivel range of the chassis. 

 

Pos: 32.80 /BA/Bedienung /Schwader/Hinweis: Breitenverstellung (Arbeitsbreite) einfahren @ 77\mod_1310372456788_78.docx @ 668133 @  @ 1 

 

 

Note 

Before switching from the working to the transport position, make sure the width adjustment 
(working width) is fully retracted. 

 

Pos: 32.81 /Überschriften/Überschriften 3/A-E/B/Bei Ausführung ohne Einkreiselaushebung @ 77\mod_1310110349917_78.docx @ 667808 @ 3 @ 1 

 

9.10.1 

For design without single-rotor lifting mechanism 

Pos: 32.82 /BA/Bedienung /Schwader/Kreiselarme senken/heben/Kreiselarme heben ohne Einkreiselaushebung Bild SW 700#_800# @ 133\mod_1350286904276_78.docx @ 1181094 @  @ 1 

 

2

SW700072

1

1

Fig. 47 

Pos: 32.83 /BA/Bedienung /Schwader/Kreiselarme senken/heben/Kreiselarme heben mit und ohne Einkreiselaushebung Text Swadro TC 680_TC 760_TC 760 X-tr @ 221\mod_1391690340653_78.docx @ 1798756 @  @ 1 

 

 

• 

Switch on the tractor. 

• 

In order to lift the locks (1), pull the operating rope (2) and keep it tensioned. 

• 

Actuate the single-action control unit until the rotors have been lifted to the transport 
position. 

• 

Release the operating rope. 

• 

Actuate the single-action control unit until the locks (1) on the right and left-hand side 
engage in the retaining bolts. 

• 

Set all hydraulic control units to the neutral position. 

• 

Visually inspect whether the retaining bolts have engaged correctly in the locks (1). 

 

Pos: 32.84 /BA/Bedienung /Schwader/Kreiselarme senken/heben/Hinweis Achten Sie auf die Transportverriegelung @ 77\mod_1310110710995_78.docx @ 667836 @  @ 1 

 

 

Note 

Make certain the transport locks engage correctly and the actuating rope is not tight. Perform a 
visual inspection to ensure the locks (1) have engaged correctly. 

 

Pos: 32.85 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Содержание Swadro TC 680











































































































































Отзывы:

Нет отзывов