Krone Swadro TC 680 Скачать руководство пользователя страница 58

Страница: 58 / 138

Start-up

Pos: 30.33 /Überschriften/Überschriften 2/A-E/BBeleuchtung anschließen @ 33\mod_1254385308979_78.docx @ 319105 @ 2 @ 1

8.4 Lighting

connection

Pos: 30.34 /BA/Inbetriebnahme/Schwader/Hinweis Sauberkeit der Stecker und Steckdosen @ 2\mod_1202399563131_78.docx @ 59273 @ @ 1

Note

Before inserting the plugs, make certain the plugs and sockets are clean and dry. Dirt and
moisture may result in short circuits!

Pos: 30.35 /BA/Inbetriebnahme/Schwader/Anschluss Beleuchtung/Anschluss Beleuchtung Bild SW TC 680_TC 760_TC 760 X-tr @ 214\mod_1390396347380_78.docx @ 1755543 @ @ 1

SW700089_1

Fig. 27

Pos: 30.36 /BA/Inbetriebnahme/Schwader/Anschluss Beleuchtung/Anschluss Beleuchtung Text @ 36\mod_1260783798936_78.docx @ 336718 @ @ 1

The lighting system is connected via the 7-pin connection cable (1).
To do this:
•

Insert the 7-pin plug of the connection cable (1) into the relevant socket (2) of the tractor.

•

Insert the 7-pin connection cable plug (1) into the appropriate socket (3) of the machine.

•

Position the cable so that it will not come in contact with the wheels.

Pos: 30.37 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1

Содержание Swadro TC 680











































































































































Результаты поиска

Содержание Swadro TC 680

Отзывы:

Krone Swadro TC 680, Оригинальная инструкция по эксплуатации, Страница: 58 / 138

Результаты поиска

Содержание Swadro TC 680

Отзывы: