Krone Swadro TC 680 Скачать руководство пользователя страница 84 | Manualshive

Страница: 84 / 138

Krone Swadro TC 680 Скачать руководство пользователя страница 84

Operation

84

Pos: 32.111 /BA/Bedienung /Schwader/Schwaden/Kreiselbetrieb wählen @ 134\mod_1350632999853_78.docx @ 1190195 @ 2 @ 1

9.14

Selecing Rotor Operation

Depending on how the machine is equipped, different rotor operations can be selected with the
rotary rake.
Twin-rotor operation: Swath placement to the middle with right and left rotor
Single rotor operation: Swath placement to the middle with left rotor
Single rotor operation: Swath placement to the middle with the right rotor

Pos: 32.112 /Überschriften/Überschriften 3/A-E/B/Bei Ausführung mit hydraulischer Einkreiselaushebung @ 77\mod_1310050459478_78.docx @ 667495 @ 3 @ 1

9.14.1

For design with hydraulic single-rotor lifting mechanism

Pos: 32.113 /BA/Bedienung /Schwader/SchwadenKreiselbetriebe bei Ausführung hydraulische Einkreiselaushebung von Arbeits- in Vorgewendestellung @ 382\mod_1444223737349_78.docx @ 2754731 @ @ 1

SW700086_2

III

II

I

I

II

III

Fig. 54
Prerequisite: The rotors are in the working position.

Single-rotor operation with right rotor

In order to use just the right rotor for swathing, proceed as follows:
•

Move the switching valve (1) to position (I).

•

To raise the left rotor to headland position, actuate the single-action control unit (1+).

•

Move control unit to neutral position.

•

Move the switching valve (1) to position (III).

•

Move single-action control unit to position (“Lower / float position”).

Twin-rotor operation

To swath with both rotors, proceed as follows:
•

Move the switching valve (1) to position (II).

•

Move single-action control unit to position (“Lower / float position”).

Single-rotor operation with left rotor

In order to use just the left rotor for swathing, proceed as follows:
•

Move the switching valve (1) to position (III).

•

To raise the right rotor to headland position, actuate the single-action control unit.

•

Move control unit to neutral position.

•

Move the switching valve (1) to position (I).

•

Move single-action control unit to position (“Lower / float position”).

Pos: 32.114 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1

«
...
82
83
84
85
86
...
»

Содержание Swadro TC 680











































































































































Отзывы:

Нет отзывов