Krone Swadro TC 1000 Скачать руководство пользователя страница 78

Страница: 78 / 132

Settings

Pos: 35.6 /Überschriften/Überschriften 2/K-O/KKreiselfahr wer k einstell en @ 2\mod_1202882031680_78.docx @ 62105 @ 2 @ 1

11.1

To adjust the rotor running gear

Pos: 35.7 /Überschriften/Z wischenüberschriften/P-TSwadro T C 1000 @ 330\mod_1427368309731_0.docx @ 2528871 @ @ 1

Swadro TC 1000

Pos: 35.8 /BA/Einstell ung en/Schwader/Kreiselfahr wer k/Kr eisel fahr wer k Bild Swadro 1000 6 R ad @ 78\mod_1314254557717_78.docx @ 695763 @ @ 1

III

Fig. 46

Pos: 35.9 /BA/Einstell ung en/Schwader/Kreiselfahr wer k/Kr eisel fahr wer k Text allgemei n @ 2 \mod_1202882266696_78.docx @ 62162 @ @ 1

The transverse inclination (in direction of travel) and the longitudinal inclination (rotor tip

forwards) of the rotors can be adjusted at the rear guide wheels of the right and left running

gear.

Pos: 35.10 /BA/Ei nstellungen/Schwader/Kr eiselfahrwer k/Kreiselfahr wer k Querneigung @ 2\mod_1202883118852_78.docx @ 62181 @ @ 1

Transverse inclination:

In order to achieve an optimal operating result, the transverse inclination (in direction of travel)

for the right and left rotors can be adjusted individually at the rear guide wheels

of the relevant

running gear (left + right).

Pos: 35.11 /BA/Ei nstellungen/Schwader/Kr eiselfahrwer k/Quer neigung Mittelschwad neu Swadr o 1000 @ 22\mod_1239866566269_78.docx @ 234507 @ @ 1

With centre swathing, the right guide wheel must be positioned lower than the left guide wheel

relative to the rotor running gear.

Pos: 35.12 /BA/Ei nstellungen/Schwader/Kr eiselfahrwer k/Kreiselfahr wer k Vorgehensweise Swadro 807_810 @ 2\mod_1202883960133_78.docx @ 62219 @ @ 1

Do not walk under the raised

rotors.

• Raise the rotor arms only far enough to be able to

perform the switching task.

• Remove the rear guide wheels and reinstall them in the desired position.

Pos: 35.13 /BA/Ei nstellungen/Schwader/Kr eiselfahrwer k/Kreiselfahr wer k Längsneigung Swadro 807/810 @ 2 \mod_1202883301211_78.docx @ 62200 @ @ 1

Longitudinal inclination:

The longitudinal inclination can be changed (rotor tips forward) by reconnecting the rear guide

wheels (right and left) of the running gear in positions (I,II,III).
Pos. I= least tipping effect
Pos. III= most tipping effect

Pos: 35.14 /BA/Ei nstellungen/Schwader/Kr eiselfahrwer k/Kreiselfahr wer k Vorgehensweise Swadro 807_810 @ 2\mod_1202883960133_78.docx @ 62219 @ @ 1

Do not walk under the raised

rotors.

• Raise the rotor arms only far enough to be able to

perform the switching task.

• Remove the rear guide wheels and reinstall them in the desired position.

Pos: 35.15 /Layout Module /---------------Seitenumbr uch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1

Содержание Swadro TC 1000





































































































































Результаты поиска

Содержание Swadro TC 1000

Отзывы:

Бренды по названию

Популярные бренды

Krone Swadro TC 1000, Руководство по эксплуатации

Результаты поиска

Содержание Swadro TC 1000

Отзывы:

Бренды по названию

Популярные бренды