manualshive.com logo in svg

Krone Swadro TC 1000, Руководство по эксплуатации

Поделиться
Скачать
Krone Swadro TC 1000 Скачать руководство пользователя страница 14

Safety

 

 

14 

 

Pos: 18.6.15 /Ü berschriften/Ü berschriften 3/U-Z/Z usatzausrüstungen und Ers atzteile @ 187\mod_1380012000801_78.docx @ 1606819 @ 3 @ 1 

 

 

3.3.6 

Additional equipment and spare parts  

Pos: 18.6.16 /BA/Sicherheit/1. Grundlegende Sicher heitshinweiseZ usatzausrüstungen und Ersatzteile_fuer  all e @ 45 3\mod_1463988536645_78.docx @ 3077246 @  @ 1 

 

Additional equipment and spare parts which do not comply with the requirements of the 

manufacturer may impair the operational safety of the machine and cause accidents. 
•  To ensure operational safety, use original parts or standard parts which correspond to the 

requirements of the manufacturer. 

 

Pos: 18.6.17 /Ü berschriften/Ü berschriften 3/A-E/AAr beitspl ätze an der M aschine @ 453\mod_1463988634725_78.docx @ 3077278 @ 3 @ 1 

 

3.3.7 

Workstations on the Machine  

Pos: 18.6.18 /BA/Sicherheit/1. Grundlegende Sicher heitshinweise/Ar beitspl ätze - Kontr olle über di e  fahrende M aschine_Selbstfahr er @ 176\mod_1372850001832_78.docx @ 1506413 @  @ 1 

 

Control of the moving machine 

The moving machine requires the driver to react quickly at any time. Otherwise, the machine 

may move in an uncontrolled manner and seriously injure or kill people. 
•  Start the engine from the driver's seat only. 
•  Never leave the driver's seat while the machine is moving. 
•  Never climb in or out of the machine while it is moving. 
 

Pos: 18.6.19 /BA/Sicherheit/1. Grundlegende Sicher heitshinweise/Ar beitspl ätze - Mitfahrende Personen_fuer  alle @ 176\mod_1372850186689_78.docx @ 1506442 @  @ 1 

 

Passengers 

Passengers may be seriously injured by the machine or fall off the machine and get run over. 

Ejected objects may strike and injure passengers. 
•  Never let people ride on the machine. 
 

Pos: 18.6.20 /Ü berschriften/Ü berschriften 3/A-E/B/Betriebssicher heit: T echnisch ei nwandfrei er Zustand @ 187\mod_1380012216128_78.docx @ 1606877 @ 3 @ 1 

 

3.3.8 

Operational safety: Technically perfect condition 

Pos: 18.6.21 /BA/Sicherheit/1. Grundlegende Sicher heitshinweise/Betriebssicherheit - Betrieb nur nach or dnungsgemäß er Inbetriebnahme_fuer alle @ 176\mod_1372854464728_78.docx @ 1506530 @  @ 1 

 

Operation only when the machine has been started up correctly 

If the machine is not started up correctly according to these operating instructions, the 

operational safety of the machine is not ensured. As a result, accidents may occur and people 

may be seriously injured or killed. 
•  Do not use the machine unless it has been started up correctly, see chapter Start-up. 
 

Pos: 18.6.22 /BA/Sicherheit/1. Grundlegende Sicher heitshinweise/Betriebssicherheit - T echnisch ei nwandfrei er Z ustand der Maschi ne_fuer all e @ 176\mod_1372854718958_78.docx @ 1506559 @  @ 1 

 

Technically perfect condition of the machine 

Improper maintenance and adjustment may affect the operational safety of the machine and 

cause accidents. As a result, people may be seriously injured or killed. 
•  Perform all maintenance and adjustment work according to the chapters Maintenance and 

Adjustment. 

•  Before performing any maintenance or adjustment work, shut down and safeguard the 

machine, see chapter Safety "Shutting down and safeguarding the machine". 

 

Pos: 18.6.23 /Layout Module /---------------Seitenumbr uch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Содержание Swadro TC 1000





































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды