Krone Swadro TC 1000, Руководство по эксплуатации

Страница: 69 / 132

Operation
69
Pos: 33.37 /Ü berschriften/Ü berschriften 2/A-E/AArbeitsbreite einstell en @ 77\mod_1310103035622_78.docx @ 667585 @ 2 @ 1
10.6 Adjusting the Working Width
Pos: 33.38 /BA/Bedienung /Schwader/Achtung Ei nstellen der Arbeitsbrei te SW 700_800_900 @ 77\mod_1310103302890_78.docx @ 667613 @ @ 1
Caution! - Adjusting the working width
Effect: Damage to the machine
• Before extending the rotors, make certain there is no one in the danger zone of the rotors!
• Never try to adjust the working width if the tractor is switched off and the tines are in contact
with the ground.
• Only set the working width of the rotor arms in headland position.
Pos: 33.39 /BA/Bedienung /Schwader/Ausführung hydr aulische Ar bei tsbr eitenverstellung Swadro TC 680_760 @ 215 \mod_1390819656579_78.docx @ 1762373 @ @ 1
• In order to lift the rotors to the headland position, actuate the single-action control unit
(red 1+).
• In order to increase the working width, actuate the double-action control unit (blue 2+).
• In order to reduce the working width, actuate the double-action control unit (blue 2-).
Pos: 33.40 /BA/Bedienung /Schwader/Ausführung hydr aulische Ar bei tsbr eitenverstellung Swadro TC 880_930_1000 Z usatz Hi nweis @ 545\mod_1528877438005_78.docx @ 3670237 @ @ 1
Notice
Do not set the minimum working width lower than the red marked area of the label.
Pos: 33.41 /BA/Bedienung /Schwader/Achtung: Arbeitsbreite ei nstellen - Aufkleber als Positi onshilfe @ 545\mod_1528877857199_78.docx @ 3670268 @ @ 1
3
4
2
1
TC930011
In order to reduce wear between stop (1) and support sheets (2), make sure when setting the
minimum working width that the inner profiles (3) of the outrigger arms do not “press” against
the stop (1). This prevents the stops and support sheets from permanently rubbing against each
other when swivelling the outrigger arms in the headland position. The label (4) is supposed to
serve as a positioning aid when retracting the outrigger arms.
In working position, the machine must be operated in such a way that the arrow does not enter
the red marked area.
Pos: 33.42 /BA/Bedienung /Schwader/Abstand der Kreisel zum Schwadfor mer @ 77\mod_1310104344400_78.docx @ 667697 @ @ 1
The distance between the rotors and the swath former:
high amount of forage = long distance
small amount of forage = short distance
Pos: 33.43 /Layout Module /---------------Seitenumbr uch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1