Krone Swadro TC 1000 Скачать руководство пользователя страница 7

Страница: 7 / 132

To this Document

Pos: 13.5 /BA/Z u diesem Dokument/Richtungsangaben_mit Ü berschrift 3. Ebene @ 311 \mod_1418209262291_78.docx @ 2405467 @ 3 @ 1

2.5.2

Direction Information

Direction information in this document such as front, rear, right and left always applies in the

direction of travel.

Pos: 13.6 /Überschriften/Überschriften 3/A-E/B/Begriff "M aschine" @ 337\mod_1430721887716_78.docx @ 2563575 @ 3 @ 1

2.5.3

Term “Machine”

Pos: 13.7 /BA/Z u diesem Dokument/Begriff M aschine_Kreiselschwader @ 344\mod_1433247257322_78.docx @ 2598046 @ @ 1

Throughout the rest of this document, the “rotor rake” will also be referred to as the “machine”.

Pos: 13.8 /Überschriften/Überschriften 3/A-E/A/Abbil dungen_Darstellungsmittel @ 336\mod_1430133919063_78.docx @ 2558462 @ 3 @ 1

2.5.4

Figures

Pos: 13.9 /BA/Z u diesem Dokument/Abbildung en_Text @ 336\mod_1430134111209_78.docx @ 2558493 @ @ 1

The figures in this document do not always represent the exact machine type. The information

which refers to the figure always corresponds to the machine type of this document.

Pos: 13.10 /Ü berschriften/Ü berschriften 3/U-Z/U mfang des Dokuments @ 346\mod_1434979896995_78.docx @ 2611366 @ 3 @ 1

2.5.5

Scope of Document

Pos: 13.11 /BA/Z u diesem D okument/U mfang des Dokuments_alle Beipacks und Vari anten enthalten_T ext @ 346 \mod_1434979460226_78.docx @ 2611335 @ @ 1

In addition to standard equipment, accessories kits and versions of the machine are described

in this document. Your machine may deviate from this document.

Pos: 13.12 /Ü berschriften/Ü berschriften 3/A-E/D /Darstell ungsmittel @ 336\mod_1429865448625_78.docx @ 2556625 @ 3 @ 1

2.5.6

Means of representation

Pos: 13.13 /Ü berschriften/Z wischenüberschriften/P-T/Symbole im Text @ 336\mod_1430121354111_78.docx @ 2557539 @ @ 1

Icons in the text

Pos: 13.14 /BA/Z u diesem D okument/D arstellungsmittel_ohne Hi nweis und War nung_BA @ 339\mod_1431002650179_78.docx @ 2570965 @ @ 1

In this document, the following means of representation are used:

Action step

A bullet point (



) designates an action step you have to perform, as for example:

• Set the left outside mirror.

Sequence of actions

Several bullet points (



) located in front of a sequence of action steps identify a sequence of

actions to be performed step by step, as for example:
•  Loosen counter nut.
•  Set the screw.
•  Tighten counter nut.

List

Dashes (-) identify lists such as, for example:
–  Brakes
–  Steering
–  Lighting

Pos: 13.15 /Layout Module /---------------Seitenumbr uch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1

Содержание Swadro TC 1000





































































































































Результаты поиска

Содержание Swadro TC 1000

Отзывы:

Бренды по названию

Популярные бренды

Krone Swadro TC 1000, Руководство по эксплуатации

Результаты поиска

Содержание Swadro TC 1000

Отзывы:

Бренды по названию

Популярные бренды