manualshive.com logo in svg

Krone Swadro TC 1000, Руководство по эксплуатации

Поделиться
Скачать
Krone Swadro TC 1000 Скачать руководство пользователя страница 12

Safety

 

 

12 

 

Pos: 18.1 /Überschriften/Überschriften 1/P-T/Sicher heit @ 0\mod_1195566748646_78.docx @ 635 @ 1 @ 1 

 

3 

Safety  

Pos: 18.2 /Überschriften/Überschriften 2/A-E/BBesti mmungsgemäße Ver wendung @ 103\mod_1332169199326_78.docx @ 940071 @ 2 @ 1 

Ver  

3.1 

Intended use  

Pos: 18.3 /BA/Einl eitung/Besti mmungsgemäßer Gebr auch/Schwader/Besti mmungsgemäß er Gebrauch Schwader @ 1 \mod_1202215704310_78.docx @ 57818 @  @ 1 

The rotary rake is built exclusively for conventional

use in agricultural work (intended use).

 

Pos: 18.4 /Überschriften/Überschriften 2/K-O/NNutzungsdauer  der Maschi ne @ 318\mod_1423658430909_78.docx @ 2465744 @ 2 @ 1 

 

3.2 

Service life of the machine  

Pos: 18.5 /BA/Einl eitungN utzungsdauer der M aschine_T ext @ 536\mod_1521559267125_78.docx @ 3632646 @  @ 1 

 

–  The service life of this machine strongly depends on proper use and maintenance as well as 

the operating conditions. 

–  Permanent operational readiness as well as long service life of the machine can be 

achieved by observing the instructions and notes of these operating instructions. 

–  After each season of use, the machine must be checked thoroughly for wear and other 

damage. 

–  Damaged and worn parts must be replaced before placing the machine into service again. 
–  After the machine has been used for five years, carry out full technical inspection of the 

machine. According to the results of this inspection, a decision concerning the possibility of 

reuse of the machine should be taken. 

Pos: 18.6.1 /Überschriften/Überschriften 2/F-J/GGrundl egende Sicher hei tshi nweise @ 186\mod_1380009482364_78.docx @ 1606585 @ 2 @ 1 

 

3.3 

Basic safety instructions  

Pos: 18.6.2 /BA/Sicherheit/1. Gr undl egende Sicherheitshinweise/Nichtbeachtung der  SiHi und WaHi (Ei nführ text Gr undl egende SiHi)_fuer  alle @ 175\mod_1372834139379_78.docx @ 1504793 @  @ 1 

 

Non-compliance with the safety instructions and warnings 

Non-compliance with the safety instructions and warnings may result in injuries and damage to 

the environment and property. 
 

Pos: 18.6.3 /Überschriften/Überschriften 3/A-E/B/Bedeutung der  Betriebsanl eitung @ 186\mod_1380011391583_78.docx @ 1606670 @ 3 @ 1 

 

3.3.1 

Importance of the operating instructions  

Pos: 18.6.4 /BA/Sicherheit/1. Gr undl egende SicherheitshinweiseBedeutung der Betriebsanl eitung _fuer alle @ 451 \mod_1462796255723_78.docx @ 3064819 @  @ 1 

 

The operating instructions are an important document and a part of the machine. They are 

aimed at the user and contain safety-relevant information. 

Only the procedures indicated in the operating instructions are reliable. If the operating 

instructions are not observed, people may be seriously injured or killed. 
•  Before using the machine for the first time, read and follow all the “Basic Safety Instructions” 

in the Safety chapter. 

•  Before working, also read and observe the respective sections in the operating instructions. 
•  Keep the operating instructions ready to hand for the user of the machine. 
•  Hand over the operating instructions to subsequent users. 
 

Pos: 18.6.5 /Layout M odule /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Содержание Swadro TC 1000





































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды