manualshive.com logo in svg

Krone Swadro TC 1000, Руководство по эксплуатации

Поделиться
Скачать
Krone Swadro TC 1000 Скачать руководство пользователя страница 22

Safety

 

 

22 

 

Pos: 18.6.63 /Ü berschriften/Ü berschriften 3/F-J/GGefahren bei besti mmten T ätig keiten: Arbeiten an der  Maschi ne @ 187\mod_1380023025765_78.docx @ 1607595 @ 3 @ 1 

 

3.3.17 

Dangers associated with certain activities: Work on the machine  

Pos: 18.6.64 /BA/Sicherheit/1. Grundlegende Sicher heitshinweiseGefahren bei best. T ätig keiten: Ar beiten an der Maschi ne-nur an stillgesetzter Maschi ne_fuer alle @ 455\mod_1464175852117_78.docx @ 3083780 @  @ 1 

 

Work on the machine only when it has been shut down 

If the machine is not shut down and safeguarded, parts may move unintentionally or the 

machine may move. Thus there is a risk of serious injuries or death. 
•  Prior to all repair and maintenance work, setting and cleaning work on the machine, shut 

down and safeguard it, refer to chapter Safety “Shutting Down and Safeguarding the 

Machine”. 

 

Pos: 18.6.65 /BA/Sicherheit/1. Grundlegende Sicher heitshinweise/Gefahr en bei best. Tätigkeiten: Ar bei ten an Maschi ne-Instandhaltungs- u. R epar aturar beiten_fuer alle @ 177\mod_1373285121161_78.docx @ 1510223 @  @ 1 

 

Maintenance and repair work 

Incorrect maintenance and repair work will endanger operational safety. As a result, accidents 

may occur and people may be seriously injured or killed. 
•  Only perform work which is described in these operating instructions. Before performing any 

work, shut down and safeguard the machine, see chapter Safety, "Shutting down and 

safeguarding the machine". 

•  All other maintenance and repair work may be performed by a qualified service centre only. 
 

Pos: 18.6.66 /BA/Sicherheit/1. Grundlegende Sicher heitshinweise/Gefahr en bei best. Tätigkeiten: Angehobene M aschi nen @ 273\mod_1404141383470_78.docx @ 2059826 @  @ 1 

 

Raised machine and machine parts 

The raised machine may accidentally drop, roll away or overturn and crush or kill people. 
•  Do not stand under the raised machine. First put the machine down. 
•  Before performing any work under the machine, securely support the machine, see chapter 

Safety "Securely supporting the raised machine and machine parts". 

•  Before performing any work on or under raised machine parts, lower the machine parts or 

secure them mechanically with rigid safety supports or with a hydraulic shut-off device to 

prevent them from dropping. 

 

Pos: 18.6.67 /BA/Sicherheit/1. Grundlegende Sicher heitshinweise/Gefahr en bei best. Tätigkeiten: Gefahr durch Schweißar bei ten - Außer Selbstfahrer  @ 244\mod_1395756512013_78.docx @ 1907210 @  @ 1 

 

Danger associated with welding work 

Improper welding work will endanger the operational safety of the machine. As a result, 

accidents may occur and people may be seriously injured or killed. 
•  Before performing welding work on the machine, obtain the consent of KRONE customer 

service and, if required, identify alternatives. 

•  Have welding work performed by experienced technicians only. 
 

Pos: 18.6.68 /Layout Module /---------------Seitenumbr uch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Содержание Swadro TC 1000





































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды