manualshive.com logo in svg

Krone Swadro TC 1000, Руководство по эксплуатации

Поделиться
Скачать
Krone Swadro TC 1000 Скачать руководство пользователя страница 56

Start-up

 

 

56 

 

Pos: 29.46.1 /Ü berschriften/Ü berschriften 2/P-T/SSicher ungskette ver wenden @ 6\mod_1214542336632_78.docx @ 94799 @ 2 @ 1 

 

8.6 

Using the safety chain  

Pos: 29.46.2 /BA/Inbetri ebnahme/Sicherungskette U SA/WARNUN G - F alsch dimensionierte Sicher ungskette ver wendet mit Variante @ 180\mod_1376576652355_78.docx @ 1547873 @  @ 1 

 

 

WARNING! 

When using a wrongly dimensioned safety chain, the safety chain may tear if the 

machine loosens unintentionally. This can result in serious accidents. 

•  Always use a safety chain with a minimum tensile strength of 89 kN (20.000 lbf). 

 

Pos: 29.46.3 /BA/Inbetri ebnahme/Sicherungskette U SA/WARNUN G - Z u straff oder zu locker  verl egte Sicher ungskette @ 226\mod_1392652264306_78.docx @ 1824606 @  @ 1 

 

 

WARNING! 

If the safety chain is layed so that it is too tight or too loose, then it may tear. As a result, 

serious injuries or damage to tractor and machine may be caused. 

•  Position the safety chain so that it does not tension when cornering. Also make sure when 

laying it that it does not touch the tractor wheels or other parts of tractor or machine. 

 

Pos: 29.46.4 /BA/Inbetri ebnahme/Sicherungskette U SA/Hinweis Sicherungskette Länder abhängig @ 6\mod_1214999654856_78.docx @ 97933 @  @ 1 

 

 

Note 

Using the safety chain 
Attachment of the safety chain is not stipulated in all countries. 

 

Pos: 29.46.5 /BA/Sicherheit/8. Voraussetzung en/Handlungsanweisung für all e M aschinen/Handlungsanweisung: M aschine stillsetzen und sichern @ 274\mod_1404365253849_78.docx @ 2065151 @  @ 1 

 

•  Shut down and safeguard the machine, see chapter Safety -> Safety routines, "Shutting 

down and safeguarding the machine". 

Pos: 29.46.6 /BA/Inbetri ebnahme/Sicherungskette U SA/Sicher ungskette ver wenden @ 207 \mod_1386742973026_78.docx @ 1714836 @  @ 1 

 

The safety chain is used as an additional safety precaution for trailed devices, should they 

become detached from the drawbar during transport. Attach the safety chain with the respective 

mounting parts to the hitching device on the tractor or to another specified connection point. The 

safety chain should have just enough play to be able to go around curves.  

Pos: 29.46.7 /Beipacks/Sonstige Beipacks_maschi nenuebergreifend/Sicherungskette 89kN Sicher ungskette am Tr aktor montieren M äher,Schwader,Wender Bild @ 430\mod_1455546854707_78.docx @ 2969383 @  @ 1 

 

ZBBP0899_2

I

II

 

Fig. 27 

Pos: 29.46.8 /Beipacks/Sonstige Beipacks_maschi nenuebergreifend/Sicherungskette 89kN /Sicherungskette am Traktor montier en Text @ 449\mod_1461735446904_78.docx @ 3054077 @  @ 1 

 

•  Install safety chain (1) on an eligible position (for example: I or II) on the tractor. 
 

Pos: 29.46.9 /Layout Module /---------------Seitenumbr uch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Содержание Swadro TC 1000





































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды