manualshive.com logo in svg

Krendl 4200-D, Руководство пользователя, Страница: 4 / 38

Поделиться
Скачать
Krendl 4200-D Скачать руководство пользователя страница 4

Rev. Date: 1/3/12

Page 1

MODEL #4200-D

INTRODUCTION

Thank you for purchasing a 

KRENDL FIBER MOVING MACHINE.

  With over fifty years experi-

ence in manufacturing fiber moving equipment, we have designed and built your machine with the
highest quality parts and workmanship to provide years of reliable service.

This manual has been prepared to help you obtain the maximum efficiency and service from your

Krendl equipment.  This machine is designed to blow cellulose, fiberglass and mineral fiber into attics.
Our primary objective is to build equipment which will provide complete satisfaction so that you may
confidently recommend Krendl to others.

We do not manufacture or sell fiber.  Our interest lies only in the proper performance of the

equipment we manufacture.  The fiber material manufacturer’s instructions prevail when it comes to
applying their product, since they guarantee the final results.

This manual contains important information regarding the safe assembly and operation of your

machine. We urge you to read it carefully and THOROUGHLY before putting your machine to work. If
your questions are not answered in this manual, please contact us. We want you to be able to operate
this equipment safely and confidently.

Upon receipt of this machine, check it carefully for any shipping damage. If there is damage or if

any of the parts are missing, notify the delivery trucking company immediately and file a claim for
damages, saving all packaging materials for inspection. Our warranty covers manufacturer’s defects
only. If Krendl Machine Company delivered or set up your machine and any parts are missing or
damaged, notify the authorized representative before they leave.

Krendl Machine Company

Telephone:

419-692-3060

1201 Spencerville Avenue

Fax:

419-695-9301

Delphos, Ohio 45833 U.S.A.

E-Mail:

[email protected]

Web Site:

www.krendlmachine.com

For your protection in the event of theft or loss, please fill in the information requested for your own
records. This information will be needed for in-warranty repairs.  You may also want to attach a copy of
your invoice.

Machine Model No. __________________________________________________________________
Machine Serial No. __________________________________________________________________

Engine Manufacturer ________________________________________________________________
Engine Model No. , Serial No.  _________________________________________________________

Blower Manufacturer  ________________________________________________________________
Blower Model No., Serial No. __________________________________________________________

Blower Clutch Manufacturer __________________________________________________________
Blower Clutch Model No., Serial No. ____________________________________________________

Airlock Clutch Manufacturer ___________________________________________________________
Airlock Clutch Model No., Serial No. _____________________________________________________

Содержание 4200-D







































Отзывы:

Нет отзывов