Krendl 4200-D, Руководство пользователя, Страница: 16 / 38

Rev. Date: 1/3/12 Page 13
MODEL #4200-D
8) Run fuel lines from the tank to the machine 5/16 ID for fuel supply, 3/16” ID for return, placing a
fuel pump in-line close to the truck’s diesel fuel tank.
In-line Fuel Pump Fuel Lines From Tank
9) Attach fuel lines to the engine.
Fuel Return Line Fuel Supply Line
10) Wire fuel pump into the machine panel box. Sample wires installed to show where fuel
pump wire will be placed.
11) Mount engine’s muffler under the truck so that the muffler’s inlet lines up with the 5” hole.
12) Run supplied flexible exhaust from the engine to the
muffler using a supplied muffler clamp on both ends.
13) Use the supplied heat wrap to wrap the exhaust, using
hose clamps to hold it in place. Make sure that exhaust
pipe and flexhaust hose are not in contact.
14) Attach 4” hose to the filter box inlet so that the hose sticks
through the 5” hole cut into the floor of the truck.
If you need more information, please call your sales agent. Your Krendl Model #4200-D Machine is
now ready for operation.
Your Krendl Model #4200-D Machine was checked and thoroughly run before it was shipped but it
is always a good idea to check all belts and chains for proper tension and that all fluid levels are
checked and topped off where required.