manualshive.com logo in svg

Krendl 4200-D, Руководство пользователя, Страница: 12 / 38

Поделиться
Скачать
Krendl 4200-D Скачать руководство пользователя страница 12

Rev. Date: 1/3/12

Page 9

MODEL #4200-D

SPECIFICATIONS

MODEL:

#4200-D

MACHINE:

14” Diameter x 14” Length airlock feeder
air volume control system
electromagnetic clutches on agitator and blower
in line helical gearbox (driving the machine)

HEIGHT:

83.00 inches

LOAD HEIGHT:

55.25 inches

WIDTH (DEPTH):

43.00 inches

LENGTH:

70.00 inches

WEIGHT:

1700 pounds

ELECTRICAL:

12VDC remote control system

BLOWER VOLUME:

170 CFM

BLOWER PRESSURE:

5.0 PSI maximum

HOSE OUTPUT:

4” diameter

MAXIMUM FEED RATES:
CELLULOSE

:

4200 lbs./hr.

FIBERGLASS

:

1700 lbs./hr.

WARNING:Recommended hose size, type and length must be used to achieve maximum

results. Krendl cannot guarantee performance of the #4200-D machine if hoses are
undersized, worn, damaged, or hoses other than those we recommend are used.

BEFORE YOU RUN THIS MACHINE...PLEASE READ THE REST OF THIS MANUAL!!

RETURNED GOODS PROCEDURE

IF MACHINE WAS NOT PURCHASED DIRECTLY FROM KRENDL MACHINE COMPANY, CON-
TACT YOUR SUPPLIER / DISTRIBUTOR.

When returning products to Krendl for repair, first obtain a return goods authorization (RGA), at

which time you will be given shipping instructions.  The product must be shipped 

PREPAID

:

Krendl Machine Company

Telephone: 419-692-3060

1201 Spencerville Ave.

Fax:

419-695-9301

Delphos, Ohio 45833 U.S.A.

E-mail:[email protected]
Web Site: www.krendlmachine.com

Once the unit is received, it will be inspected.  In-warranty units will be repaired and returned

immediately.  An estimate of repair charges will be provided for out-of-warranty units.

Содержание 4200-D







































Отзывы:

Нет отзывов